IDEAS home Printed from https://ideas.repec.org/a/vrs/repfms/v24y2016i38p95-102n12.html
   My bibliography  Save this article

Wear of Cutting Tool with Excel Geometry in Turning Process of Hardened Steel

Author

Listed:
  • Samardžiová Michaela

    (Institute of Production Technologies, Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in Bratislava, Ulica Jána Bottu 2781/25, 917 24 Trnava, Slovak Republic)

Abstract

This paper deals with hard turning using a cutting tool with Xcel geometry. This is one of the new geometries, and there is not any information about Xcel wear in comparison to the conventional geometry. It is already known from cutting tools producers that using the Xcel geometry leads to higher quality of machined surface, perticularly surface roughness. It is possible to achieve more than 4 times lower Ra and Rz values after turning than after using conventional geometry with radius. The workpiece material was 100Cr6 hardened steel with hardness of 60 ± 1 HRC. The machine used for the experiment was a lathe with counter spindle DMG CTX alpha 500, which is located in the Centre of Excellence of 5–axis Machining at the Faculty of Materials Science and Technology in Trnava. The cutting tools made by CBN were obtained from Sandvik COROMANT Company.

Suggested Citation

  • Samardžiová Michaela, 2016. "Wear of Cutting Tool with Excel Geometry in Turning Process of Hardened Steel," Research Papers Faculty of Materials Science and Technology Slovak University of Technology, Sciendo, vol. 24(38), pages 95-102, September.
    • Handle: RePEc:vrs:repfms:v:24:y:2016:i:38:p:95-102:n:12
    DOI: 10.1515/rput-2016-0044
    as

    Download full text from publisher

    File URL: https://doi.org/10.1515/rput-2016-0044
    Download Restriction: no
    File URL: https://libkey.io/10.1515/rput-2016-0044?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:vrs:repfms:v:24:y:2016:i:38:p:95-102:n:12. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Peter Golla (email available below). General contact details of provider: https://www.sciendo.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.