IDEAS home Printed from https://ideas.repec.org/a/plo/pone00/0314561.html
   My bibliography  Save this article

Study on the effects of the shot peening intensity on the microstructure, friction and wear properties of high-strength steel

Author

Listed:
  • Huashen Guan
  • Junjie Zhang
  • Xiaoguang Zhang
  • Guofu Sun
  • Chenfeng Duan

Abstract

The microstructure, hardness, residual stress, and friction and wear properties of 25CrNi2MoV steel with different particle diameters during shot peening strengthening were studied. Studies have shown that a grain refinement layer appeared on the surface of the material after shot peening. The shot peening intensity increased with increasing particle diameter; a greater shot peening intensity corresponded to a greater surface hardness of the material, the maximum hardness was 592 HV0.2, and the residual compressive stress on the material surface was 725 MPa. A shot peening finite element model was established to accurately predict the residual stresses in the samples after shot peening. The prediction errors were 1.4–7.9%. The finite element model indicates that the maximum residual stress occurs in the subsurface layer. After shot peening, the wear resistance of the sample significantly improved, and the amount of wear significantly decreased. Therefore, shot peening can significantly improve the mechanical properties and wear resistance of high-strength steel, which increases the service life of parts.

Suggested Citation

  • Huashen Guan & Junjie Zhang & Xiaoguang Zhang & Guofu Sun & Chenfeng Duan, 2024. "Study on the effects of the shot peening intensity on the microstructure, friction and wear properties of high-strength steel," PLOS ONE, Public Library of Science, vol. 19(12), pages 1-18, December.
    • Handle: RePEc:plo:pone00:0314561
    DOI: 10.1371/journal.pone.0314561
    as

    Download full text from publisher

    File URL: https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0314561
    Download Restriction: no
    File URL: https://journals.plos.org/plosone/article/file?id=10.1371/journal.pone.0314561&type=printable
    Download Restriction: no
    File URL: https://libkey.io/10.1371/journal.pone.0314561?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:plo:pone00:0314561. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: plosone (email available below). General contact details of provider: https://journals.plos.org/plosone/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.