Author
Listed:
- Tao Wang
(Jiangsu Key Laboratory of Nano Technology, Center of Energy Storage Materials & Technology, College of Engineering and Applied Sciences
Nanjing University, National Laboratory of Solid State Microstructures and Collaborative Innovation Center of Advanced Microstructures)
- Guo Yang
(Jiangsu Key Laboratory of Nano Technology, Center of Energy Storage Materials & Technology, College of Engineering and Applied Sciences
Nanjing University, National Laboratory of Solid State Microstructures and Collaborative Innovation Center of Advanced Microstructures)
- Mingjin Cui
(Jiangsu Key Laboratory of Nano Technology, Center of Energy Storage Materials & Technology, College of Engineering and Applied Sciences
Nanjing University, National Laboratory of Solid State Microstructures and Collaborative Innovation Center of Advanced Microstructures
University of Shanghai for Science and Technology, Institute of Energy Materials Science)
- Huitang Xia
(Tongji University, Shanghai Key Laboratory for R&D and Application of Metallic Functional Materials, Institute of New Energy for Vehicles, School of Materials Science and Engineering)
- Chenlu Jiang
(Jiangsu Key Laboratory of Nano Technology, Center of Energy Storage Materials & Technology, College of Engineering and Applied Sciences
Nanjing University, National Laboratory of Solid State Microstructures and Collaborative Innovation Center of Advanced Microstructures)
- Yuheng Xia
(Jiangsu Key Laboratory of Nano Technology, Center of Energy Storage Materials & Technology, College of Engineering and Applied Sciences
Nanjing University, National Laboratory of Solid State Microstructures and Collaborative Innovation Center of Advanced Microstructures)
- Ke Chen
(Tongji University, Shanghai Key Laboratory for R&D and Application of Metallic Functional Materials, Institute of New Energy for Vehicles, School of Materials Science and Engineering)
- Menghao Yang
(Tongji University, Shanghai Key Laboratory for R&D and Application of Metallic Functional Materials, Institute of New Energy for Vehicles, School of Materials Science and Engineering)
- Jiwoong Bae
(Hanyang University, School of Mechanical Engineering)
- Cheng Gu
(Nanjing University, State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment)
- Yu Ding
(Jiangsu Key Laboratory of Nano Technology, Center of Energy Storage Materials & Technology, College of Engineering and Applied Sciences
Nanjing University, National Laboratory of Solid State Microstructures and Collaborative Innovation Center of Advanced Microstructures)
Abstract
Self-charging batteries, which integrate energy conversion and storage within a single system, represent a promising technology for building a reliable and intelligent energy network. However, the charging rate of conventional self-charging energy systems that use solid-state electrodes is limited by slow solid-gas reaction processes at the electrode-air interface. A complete charging procedure typically requires several hours. Here we show a self-charging organic redox flow battery to address the limitations of solid-state reaction kinetics. A high charging rate is achieved, with 94% of the total capacity reached within 8 minutes, owing to the rapid kinetics of liquid-phase redox reactions. Using manganese oxide-based catalysts to reduce side reactions, the flow battery exhibits nearly 99.98% capacity retention over 1,600 cycles. Even in a harsh environment of -10 °C, the battery can run more than 2,500 cycles at a current density of 20 mA cm-2. The redox chemistry underlying the self-charging mechanism is investigated through computational modeling and in situ characterization, revealing that fast outer-sphere electron transfer during the enolization reaction contributes significantly to the reaction kinetics. In the proof-of-concept demonstration, we further extend the system from zinc to magnesium and aluminum as the negative electrodes, demonstrating a potential pathway for constructing sustainable energy systems.
Suggested Citation
Tao Wang & Guo Yang & Mingjin Cui & Huitang Xia & Chenlu Jiang & Yuheng Xia & Ke Chen & Menghao Yang & Jiwoong Bae & Cheng Gu & Yu Ding, 2025.
"Self-charging organic flow batteries based on multivalent metal negative electrodes,"
Nature Communications, Nature, vol. 16(1), pages 1-12, December.
Handle:
RePEc:nat:natcom:v:16:y:2025:i:1:d:10.1038_s41467-025-65245-6
DOI: 10.1038/s41467-025-65245-6
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:nat:natcom:v:16:y:2025:i:1:d:10.1038_s41467-025-65245-6. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.nature.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.