IDEAS home Printed from https://ideas.repec.org/a/ids/ijpmbe/v8y2018i4p516-530.html
   My bibliography  Save this article

Experimental investigation on surface integrity in machining of Inconel X750 with WEDM using Taguchi technique

Author

Listed:
  • Mandeep Kumar
  • Hari Singh

Abstract

The objective of the present work is to investigate the effects of various WEDM process parameters such as pulse on time, pulse off time, servo voltage, peak current, wire tension and wire feed rate on the surface roughness of the machined samples. The analysis of variance was carried out for raw data as well as for signal to noise ratio. Four input parameters have been found to be statistically significant for their effects on the response of interest. The optimum value of surface roughness was obtained at pulse on time - 110; pulse off time - 51; spark gap voltage - 65 V; peak current - 90 A; wire feed - 11; wire tension - 5. The confirmation experiments were also performed for validating the predicted results. Scanning electron microscopy was performed on the machined samples to investigate the effect and microstructure of the samples after machining.

Suggested Citation

  • Mandeep Kumar & Hari Singh, 2018. "Experimental investigation on surface integrity in machining of Inconel X750 with WEDM using Taguchi technique," International Journal of Process Management and Benchmarking, Inderscience Enterprises Ltd, vol. 8(4), pages 516-530.
    • Handle: RePEc:ids:ijpmbe:v:8:y:2018:i:4:p:516-530
    as

    Download full text from publisher

    File URL: http://www.inderscience.com/link.php?id=95057
    Download Restriction: Access to full text is restricted to subscribers.
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:ids:ijpmbe:v:8:y:2018:i:4:p:516-530. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sarah Parker (email available below). General contact details of provider: http://www.inderscience.com/browse/index.php?journalID=95 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.