IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v9y2016i1p44-d86418.html
   My bibliography  Save this article

Characteristics of Suspended Sediment Loadings under Asian Summer Monsoon Climate Using the Hydrological Simulation Program-FORTRAN

Author

Listed:
  • Ji-Hong Jeon

    (Department of Environmental Engineering, Andong National University, Andong 760748, Korea)

  • Chan-Gi Park

    (Department of Rural Construction Engineering, Kongju National University, Yesan 32439, Korea)

  • Donghyuk Choi

    (Department of Environmental Engineering, Andong National University, Andong 760748, Korea)

  • Taedong Kim

    (Department of Environmental Engineering, Andong National University, Andong 760748, Korea)

Abstract

The extreme variation in the amount of annual precipitation and rainfall during single events is typical of the East Asian monsoon climate and may greatly influence the characteristics of the suspended sediment load. The turbidity in Lake Imha which is the eighth largest multipurpose dam in Korea has been the cause of major water quality problems for use as drinking water. The turbidity rose to 882 NTU, and it remained over 30 NTU continuously for 170 days during 2002, as the result of significant amounts of soil erosion from the watershed during the Asian monsoon typhoon. In this study, characteristics of suspended sediment loadings under the Asian summer monsoon climate was investigated by comparing the variation of yearly suspended sediment loads and the ratio of maximum suspended sediment loads in a single event to yearly suspended sediment load from Lake Imha watershed using the Hydrologic Simulation Program-FORTRAN (HSPF). The model calibration is performed according to the 2009–2010 events, and simulation results characterized suspended sediment loadings under the Asian summer monsoon climate for 2001–2010. Water sampling and flow rate measurements were performed every 4–6 h, and calibration was performed using hourly simulated sediment loads. The calibration results demonstrated good agreement with the observed data. The characteristics of suspended sediment loadings under the Asian summer monsoon climate are a high variance of the yearly suspended sediment load and a significant of amount of suspended sediment load during a single event influenced by the typhoon intensity. The maximum yearly suspended sediment load was 10 times higher than the minimum yearly value. About half of the yearly suspended sediment load was loaded with a single event under the Asian summer monsoon climate and the ratio of suspended sediment loads by a single event to total yearly loads ranged from 29% to 90%. Structural best management practices (BMPs) to trap suspended sediment in stormwater such as stormwater ponds or wetlands rely on much more storage volume or area and non-structural BMPs to minimize soil erosion by source control such as mulching or revegetation in disturbed areas, which are important BMPs, especially in the Asian summer monsoon region.

Suggested Citation

  • Ji-Hong Jeon & Chan-Gi Park & Donghyuk Choi & Taedong Kim, 2016. "Characteristics of Suspended Sediment Loadings under Asian Summer Monsoon Climate Using the Hydrological Simulation Program-FORTRAN," Sustainability, MDPI, vol. 9(1), pages 1-15, December.
  • Handle: RePEc:gam:jsusta:v:9:y:2016:i:1:p:44-:d:86418
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/9/1/44/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/9/1/44/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:9:y:2016:i:1:p:44-:d:86418. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.