Innovations in Membrane Technology for Water Harvesting from Fog: A Review

Access to clean water remains a critical global challenge, particularly in arid and fog-rich regions where conventional resources are limited. Fog water harvesting has emerged as a low-energy alternative; however, the performance of traditional collectors (typically 3–10 L m −2 day −1 ) remains constrained by inefficient droplet capture and transport. This review provides a systematic and critical analysis of recent advances in membrane-based fog harvesting technologies, focusing on material design, surface engineering, and structural optimization. The analysis shows that nanostructured and electrospun membrane systems can enhance water collection rates to ~20–60 L m −2 day −1 , representing up to a 5–6 times improvement over conventional meshes. Furthermore, biomimetic and Janus wettability designs significantly improve droplet nucleation and directional transport, while hierarchical micro/nanostructures accelerate coalescence and runoff dynamics. At the structural level, optimized collector geometries (vertical harp designs) demonstrate ~3–4 times higher collection efficiency compared to traditional Raschel mesh due to reduced clogging and enhanced drainage. Despite these advances, key challenges remain, including material durability, fouling resistance, lack of standardized testing protocols, and limited large-scale validation. This review identifies critical design–performance relationships and proposes a framework linking surface wettability, morphology, and environmental parameters to harvesting efficiency. Future directions emphasize the development of durable, scalable membrane systems and the integration of fog harvesting with hybrid water supply technologies.