Synergistic Seepage-Reduction and Immobilization Effect and Mechanism of Microbial-Induced Calcium Carbonate Precipitation Bio-Coating on Heavy Metal

Industrial activities have caused heavy metals, such as cadmium (Cd), chromium (Cr), lead (Pb), and copper (Cu), to seriously threaten groundwater safety through seepage pathways. This study explored the formation of biofilms using microbe-induced calcium carbonate precipitation (MICP) technology to simultaneously reduce seepage in contaminated water and immobilize heavy metals. By optimizing the cementation fluid concentration and the intermittent grouting time, the optimal operating conditions for forming a biofilm were determined to be 1.5 mol/L cementation fluid and an intermittent time of 12 h, under which the stable infiltration rate of the sandy loam soil column can be reduced by more than 80%. We found that this biofilm can effectively inhibit the convective transport of Cd, Cr, Pb, and Cu, with the cumulative convective flux reduction rates reaching 56.25%, 56.25%, 54.54%, and 55.59%, respectively. SEM and XRD analysis indicate that the physical blockage of soil pores by calcium carbonate crystals is the dominant mechanism controlling infiltration flow, while the detection of new mineral phases, such as lead carbonate (PbCO 3 ), cadmium carbonate (CdCO 3 ), and basic copper carbonate (Cu 2 (OH) 2 CO 3 ) provides direct evidence for the chemical co-precipitation immobilization of heavy metals. This study demonstrates that MICP biofilm is a green and sustainable technology for in situ remediation of heavy metal pollution through physical–chemical synergistic effects, offering a promising alternative with a lower environmental footprint compared to conventional methods.