Author
Listed:
- Beata Łaźniewska-Piekarczyk
(Department of Building Processes and Building Physics, Faculty of Civil Engineering, Silesian University of Technology, Akademicka 5, 44-100 Gliwice, Poland)
- Monika Czop
(Department of Waste Management Technologies, Faculty of Energy and Environmental Engineering, Silesian University of Technology, Konarskiego 18, 44-100 Gliwice, Poland)
- Elwira Zajusz-Zubek
(Department of Air Protection, Faculty of Energy and Environmental Engineering, Silesian University of Technology, Konarskiego 22B, 44-100 Gliwice, Poland)
Abstract
This study investigates the valorisation of mixed municipal waste glass (MMWG; EWC 20 01 02) as a sustainable supplementary material in cement mortars. In contrast to most existing studies, which focus almost exclusively on homogeneous container glass, this work addresses a heterogeneous waste stream derived from municipal selective collection, containing flat glass, mirrors, ceramics, porcelain, and metallic residues. Such mixed household glass has not previously been systematically evaluated in cement mortars, thereby addressing a clear research gap. The MMWG was washed, dried, and ground in a Los Angeles drum with corundum abrasives to obtain a fine glass powder (FGP < 63 µm) with a median particle size of approximately 20 µm and a Blaine fineness of 360 m 2 /kg. Microstructural and chemical characterisation of the milled glass confirmed its highly amorphous nature and angular particle morphology resulting from grinding. In addition, coarse glass granules (0–4 mm) were used as partial replacements for natural sand in mortar mixtures. The incorporation of FGP led to a 4–12% reduction in flowability, attributable to the angular shape and increased specific surface area of the ground-glass particles. At 28 days, mortars containing 5–10% FGP exhibited mechanical properties comparable to the reference mix, while at 56 days their compressive strength increased by up to 8%, indicating delayed pozzolanic activity typical of finely milled, amorphous glass. Mortars containing coarse glass primarily reflected a filler and aggregate-replacement effect. Leaching tests conducted in accordance with PN-EN 12457-4 demonstrated that all mortars, both reference and MMWG-modified, complied with the non-hazardous waste limits defined in Council Decision 2003/33/EC. Minor exceedances of Ba and Cr relative to inert-waste thresholds were observed; however, these values remained within the permissible range for non-hazardous classification and were attributed to ceramic and metallic contaminants inherently present in the mixed glass fraction. Overall, this study demonstrates that mixed municipal waste glass—a widely available yet rarely valorised heterogeneous waste stream—can be effectively utilised as a finely ground supplementary material and as a partial aggregate replacement in cement mortars, provided that particle fineness is adequately controlled and durability-related effects are monitored. The findings extend the applicability of glass waste beyond container cullet and support the development of circular-economy solutions in construction materials.
Suggested Citation
Beata Łaźniewska-Piekarczyk & Monika Czop & Elwira Zajusz-Zubek, 2026.
"Valorisation of Mixed Municipal Waste Glass (EWC 20 01 02) as a Reactive Supplementary Material in Cement Mortars,"
Sustainability, MDPI, vol. 18(2), pages 1-33, January.
Handle:
RePEc:gam:jsusta:v:18:y:2026:i:2:p:771-:d:1838719
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:18:y:2026:i:2:p:771-:d:1838719. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.