Microalgae-Based Photosynthetic Biogas Upgrading: Reactor Engineering, Operational Parameters, and Sustainability Assessment—A Review

Photosynthetic biogas upgrading (PBU) using microalgae is a promising biological approach for converting raw biogas into biomethane while recovering nutrients and fixing part of the biogenic CO 2 into algal biomass. Unlike conventional physicochemical technologies, which mainly separate CO 2 from CH 4 , PBU can combine gas upgrading with wastewater or digestate treatment, nutrient recycling, and biomass production. This review assesses the current state of PBU technology, with particular emphasis on high-rate algal ponds, absorption columns, and closed photobioreactors. It examines the main operating parameters that control gas–liquid mass transfer, carbonate buffering, and photosynthetic activity, including the liquid-to-gas ratio, pH, alkalinity, temperature, light regime, light intensity, and gas retention time. Special attention is given to the combined effects of the L/G ratio, pH, and alkalinity, as these parameters strongly influence CO 2 absorption, CH 4 enrichment, and O 2 contamination of the upgraded gas. The use of wastewater or anaerobic digestate instead of synthetic growth media is identified as an important sustainability advantage, particularly at wastewater treatment plants with existing anaerobic digestion and nutrient-rich side streams. However, digestate use may also create operational challenges related to turbidity, ammonium inhibition, solids, and variable composition. Available studies indicate that PBU may reduce operating costs and greenhouse gas emissions under favorable conditions while creating additional value from algal biomass. Nevertheless, wider deployment is still limited by high land requirements, seasonal variability, O 2 contamination, biomass harvesting, and limited evidence from large-scale systems. Future development should therefore focus on improved oxygen management, more efficient reactor designs, nanoparticle-assisted enhancement of photosynthetic activity, better integration with wastewater treatment, and AI-supported monitoring and control to improve process stability and support scale-up.