IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v18y2026i11p5386-d1952926.html

Effect of Fly Ash Content and Aggregate Type on Concrete Mechanical, Durability, and Environmental Performance

Author

Listed:
  • Ali Mardani

    (Department of Civil Engineering, Bursa Uludag University, Nilufer, 16059 Bursa, Türkiye)

  • Hatice Gizem Şahin

    (Department of Civil Engineering, Bursa Uludag University, Nilufer, 16059 Bursa, Türkiye)

  • Öznur Biricik

    (Department of Civil Engineering, Bursa Uludag University, Nilufer, 16059 Bursa, Türkiye)

  • Murat Tuyan

    (Department of Civil Engineering, University of Ottawa, Ottawa, ON K1H 8M5, Canada)

Abstract

This study investigates the influence of fly ash (FA) content and aggregate type on the mechanical performance and environmental efficiency of concrete. Twelve concrete mixtures were prepared using limestone and basalt aggregates, with FA replacement levels of 0%, 15%, and 35% and water-to-binder (w/b) ratios of 0.4 and 0.7. Compressive strength (CS), the modulus of elasticity (MoE), water absorption, and freeze–thaw resistance were measured. Basalt aggregates enhanced the CS and MoE while reducing water absorption and freeze–thaw deterioration compared to limestone. Although a higher FA content lowered early-age strength and stiffness, it contributed to long-term improvements and greater eco-efficiency. A new MoE prediction model incorporating CS, unit weight, aggregate type, and FA content demonstrated better accuracy than current standards. Assessment of binder usage and CO 2 intensity confirmed that all mixtures remained below the average literature values. The optimal combination was achieved with basalt aggregates, a high FA content, a low w/b ratio, and extended curing, highlighting strategies for sustainable concrete production.

Suggested Citation

  • Ali Mardani & Hatice Gizem Şahin & Öznur Biricik & Murat Tuyan, 2026. "Effect of Fly Ash Content and Aggregate Type on Concrete Mechanical, Durability, and Environmental Performance," Sustainability, MDPI, vol. 18(11), pages 1-26, May.
    • Handle: RePEc:gam:jsusta:v:18:y:2026:i:11:p:5386-:d:1952926
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/18/11/5386/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/18/11/5386/
    Download Restriction: no
    ---><---

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:18:y:2026:i:11:p:5386-:d:1952926. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager The email address of this maintainer does not seem to be valid anymore. Please ask MDPI Indexing Manager to update the entry or send us the correct address (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.