Dynamic Regulation and Renewable Integration for Low-Carbon District Heating Networks

Integration of renewable energy sources into existing residential and communal district heating systems requires technical adjustments and corrections. Measures aimed at reducing heat consumption at the points of delivery have a similar impact. This study aims, through simplified partial models (in heating mode), to present the relationships between these modifications and their potential effects on operational problems and deficiencies. The main parameters assessed in the design and correction of systems are temperature differentials, derived flow rates, pumping work, and control methods. Within the chain of heat source–primary distribution–secondary distribution–consumers, the analysis focuses on secondary circuits with consumers. A simplified multi-building network model was used to compare static and dynamic control strategies under temperature regimes of 70/50 °C, 60/40 °C, and 40/30 °C. The results show that dynamic control based on variable-frequency pumps, weather-compensated supply regulation, and optimized temperature differences between supply and return lines (ΔT) reduces pumping energy by 30–40% and increases heat delivery efficiency by up to 10%. A significant reduction in CO 2 emissions is also observed due to decreased pumping work, reduced heat losses in the distribution network, and the integration of renewable energy sources. The savings depend on the type and extent of RES utilization. The implementation of dynamic control in these systems significantly improves exergy efficiency, operational stability, and the potential for low-temperature operation, thus providing a practical framework for the modernization of district heating networks.