Study on the Sustainable Degradation of Sulfur Hexafluoride by Thermal Plasma for Greenhouse Gas Abatement

This study addresses the challenges of efficiency and cost in traditional sulfur hexafluoride (SF 6 ) degradation methods and the throughput limitations of common plasma technologies, with the aim of promoting sustainable treatment of potent greenhouse gases. A method of premixing SF 6 with plasma media before entering the plasma discharge region was employed to systematically investigate the effects of three atmospheres—nitrogen, air, and hydrogen—on the degradation efficiency, product distribution, and energy efficiency of SF 6 . An experimental setup was constructed, and Gibbs free energy minimization simulations were conducted to analyze the degradation performance under different conditions. The results show that the premixed gas injection method achieves a degradation removal efficiency of over 99.84% when the SF 6 flow rate is lower than 4 slm, which is significantly better than the staged mixing method. When the discharge current increases from 40 A to 100 A, the degradation effect of SF 6 improves significantly, but the improvement becomes marginal when the current is further increased to 120 A. Compared with nitrogen, air and hydrogen atmospheres can effectively enhance the degradation removal rate, with the air atmosphere achieving the highest energy yield of 271 g/kWh. This research reveals the regulatory mechanism of medium components on SF 6 degradation, providing a theoretical basis for the sustainable, full-process treatment of industrial-scale reactors and contributing to the mitigation of greenhouse gas emissions.