Author
Listed:
- Jie Zhang
(Faculty of Land Resources Engineering, Kunming University of Science and Technology, Kunming 650093, China
Yunnan Institute of Geo-Environment Monitoring, Kunming 650216, China
Yunnan Key Laboratory of Geohazard Forecast and Geoecological Restoration in Plateau Mountainous Area, Kunming 650216, China
Key Laboratory of Geohazard Forecast and Geoecological Restoration in Plateau Mountainous Area, MNR, Kunming 650216, China)
- Fucai Liu
(School of Public Safety and Emergency Management, Kunming University of Science and Technology, Kunming 650093, China)
- Yi Yang
(Faculty of Land Resources Engineering, Kunming University of Science and Technology, Kunming 650093, China
School of Public Safety and Emergency Management, Kunming University of Science and Technology, Kunming 650093, China)
- Zhiquan Yang
(School of Public Safety and Emergency Management, Kunming University of Science and Technology, Kunming 650093, China)
- Zhong Zi
(School of Public Safety and Emergency Management, Kunming University of Science and Technology, Kunming 650093, China)
- Qiuyue Ding
(Faculty of Land Resources Engineering, Kunming University of Science and Technology, Kunming 650093, China
Yunnan Zhike Safety Consulting Co., Ltd., Kunming 650093, China)
- Guanqun Wang
(Yunnan Institute of Geo-Environment Monitoring, Kunming 650216, China
Yunnan Key Laboratory of Geohazard Forecast and Geoecological Restoration in Plateau Mountainous Area, Kunming 650216, China
Key Laboratory of Geohazard Forecast and Geoecological Restoration in Plateau Mountainous Area, MNR, Kunming 650216, China)
- Wenjun Zhang
(Yunnan Institute of Geo-Environment Monitoring, Kunming 650216, China
Yunnan Key Laboratory of Geohazard Forecast and Geoecological Restoration in Plateau Mountainous Area, Kunming 650216, China
Key Laboratory of Geohazard Forecast and Geoecological Restoration in Plateau Mountainous Area, MNR, Kunming 650216, China)
- Xusheng Dai
(Yunnan Institute of Geo-Environment Monitoring, Kunming 650216, China
Yunnan Key Laboratory of Geohazard Forecast and Geoecological Restoration in Plateau Mountainous Area, Kunming 650216, China
Key Laboratory of Geohazard Forecast and Geoecological Restoration in Plateau Mountainous Area, MNR, Kunming 650216, China)
- Yilin Liang
(School of Public Safety and Emergency Management, Kunming University of Science and Technology, Kunming 650093, China)
- Guanxiong Liu
(Yunnan Yunlv Haixin Aluminum Industry Co., Ltd., Zhaotong 657005, China)
Abstract
Investigating the properties of red clay under the action of dry–wet cycles is crucial for mitigating geological disasters and promoting the sustainable development of geotechnical engineering infrastructure. In this paper, red clay from the Yuanmou dry-hot valley in Yunnan Province was selected as the research subject. The investigation focused on examining the effects of dry–wet cycles on its permeability and shear strength. Samples were prepared by controlling the initial moisture content (8%, 11%, 14%, 17%, and 20% for permeability tests; 11%, 14%, and 17% for strength tests) and initial dry density (1.65 g/cm 3 , 1.70 g/cm 3 , 1.75 g/cm 3 , and 1.80 g/cm 3 ). We conducted variable-head permeability tests and direct shear tests on samples undergoing 1–5 dry–wet cycles. The results demonstrated that (1) the saturated moisture content decreased with the increasing number of dry–wet cycles, with the first cycle showing the most significant decrease (decreasing by approximately 15–25% depending on initial conditions). (2) The permeability coefficient decreased continuously with the number of cycles, exhibiting a transition behavior around the optimum moisture content (14%). Samples with lower initial moisture content (8–14%) showed higher permeability reduction (up to 40% decrease) compared to those with higher initial moisture content (14–20%). (3) The dry–wet cycles lead to a significant attenuation of the shear strength, and the first cycle has the largest reduction. The shear strength parameters of red clay exhibit distinct attenuation patterns. The cohesion decreased exponentially with the number of cycles (total attenuation ≈55–60%), and the internal friction angle decreased linearly (total attenuation ≈20–25%). The total attenuation of cohesion was much larger than the internal friction angle. (4) The degradation mechanism is essentially a multi-scale coupling process of cementation dissolution, pore collapse, and fracture expansion of red clay internal structure. These findings provide critical insights for sustainable engineering design and disaster prevention in regions with similar soil conditions, contributing to the resilience and longevity of infrastructure under changing climatic conditions.
Suggested Citation
Jie Zhang & Fucai Liu & Yi Yang & Zhiquan Yang & Zhong Zi & Qiuyue Ding & Guanqun Wang & Wenjun Zhang & Xusheng Dai & Yilin Liang & Guanxiong Liu, 2025.
"Effects of Dry–Wet Cycles on Permeability and Shear Strength of Yuanmou Red Clay,"
Sustainability, MDPI, vol. 17(19), pages 1-19, October.
Handle:
RePEc:gam:jsusta:v:17:y:2025:i:19:p:8900-:d:1766155
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:17:y:2025:i:19:p:8900-:d:1766155. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.