Author
Listed:
- Ali Hashim Mohammed
(Research Laboratory of Environmental Sciences and Sustainable Development LASED LR18ES32, Preparatory Institute for Engineering Studies, University of Sfax, Sfax 3029, Tunisia)
- Sufyan Mohammed Shartooh
(Biology Department, College of Science, University of Anbar, Ramadi 31001, Iraq)
- Mohamed Trigui
(Research Laboratory of Environmental Sciences and Sustainable Development LASED LR18ES32, Preparatory Institute for Engineering Studies, University of Sfax, Sfax 3029, Tunisia)
Abstract
This study investigates the biosorption of heavy metal ions (Pb, Fe, Cu, Cd, Zn, and Mn) from wastewater using the powdered biomass of Phragmites australis (common reed) under varying conditions, including temperature, pH, retention time, plant powder size, and biosorbent weight. The results showed that plant powder size significantly influenced the biosorption efficiency, with the 0.5 mm diameter powder yielding the highest removal rates for the heavy metal ions. The optimal temperature for biosorption was found to be between 30 and 50 °C, achieving up to 99.94% removal for Pb. The ideal pH for the biosorption of all metals was seven, and the best retention time for ion removal was 30 min, with a mean biosorption rate of 99.82% for Fe. A biosorbent weight of 10 g/L was also identified as the most effective for metal ion removal. Furthermore, two forms of P. australis , dry pieces and powdered biomass, were tested, with the powdered biomass exhibiting a superior biosorption performance. FTIR analysis revealed the involvement of carboxyl and hydroxyl functional groups in the biosorption process, while SEM imaging confirmed the surface interactions between metal ions and the plant material. The adsorption of heavy metals onto P. australis was effectively described by both Langmuir and Freundlich isotherm models, indicating a mix of monolayer coverage and heterogeneous interactions. The Langmuir model showed the highest adsorption capacities for Mn 2+ (6.29 mg/g) and Cd 2+ (5.10 mg/g), with strong affinities for Pb 2+ ( K L = 0.0122 L/mg), Fe 2+ ( K L = 0.0137 L/mg), and Cu 2+ ( K L = 0.0130 L/mg). Similarly, the Freundlich model indicated favorable adsorption ( n > 1) for all ions. Cu 2+ and Fe 2+ had the highest adsorption intensities ( n = 2.06), with the strongest capacities being observed for Fe 2+ ( K f = 0.231) and Cu 2+ ( K f = 0.222). These findings confirm the high potential of P. australis as a sustainable and eco-friendly biosorbent.
Suggested Citation
Ali Hashim Mohammed & Sufyan Mohammed Shartooh & Mohamed Trigui, 2025.
"Biosorption and Isotherm Modeling of Heavy Metals Using Phragmites australis,"
Sustainability, MDPI, vol. 17(12), pages 1-17, June.
Handle:
RePEc:gam:jsusta:v:17:y:2025:i:12:p:5366-:d:1676126
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:17:y:2025:i:12:p:5366-:d:1676126. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.