Author
Listed:
- Ming Li
(School of Civil Engineering, University of South China, Hengyang 421001, China)
- Chongjie Liao
(School of Civil Engineering, University of South China, Hengyang 421001, China)
- Qi He
(School of Civil Engineering, University of South China, Hengyang 421001, China)
- Yifan Yang
(School of Civil Engineering, University of South China, Hengyang 421001, China)
Abstract
This study proposes a sustainable method to convert high-silicon lead-zinc tailings (HS-LZT) into lightweight and high-strength ceramsite, aiming to address the issues of solid waste management and resource efficiency by using HS-LZT and kaolin as the main raw materials and silicon carbide (SiC) as the pore-forming agent. A sintering process was employed to prepare lightweight, high-strength ceramsite. X-ray diffraction (XRD), X-ray fluorescence (XRF), Thermogravimetric-differential scanning calorimetry (TG-DSC), and inductively coupled plasma optical emission spectrometer (ICP-OES) were used to analyze the physical composition and physical and chemical properties of the raw materials. The influence of raw material ratios, SiC content, sintering temperature, and sintering time on ceramsite properties was investigated, and the microstructure of the optimal finished ceramsite was analyzed. The results show that under optimal preparation conditions (70% [by mass percentage] of HS-LZT, 30% [by mass percentage] of kaolin, with an addition of 0.5% [by mass percentage] of SiC, a sintering temperature of 1200 °C, and a sintering time of 20 min), the LZT ceramsite achieved a compressive strength of 11.39 MPa, a bulk density of 724 kg/m 3 , and a 1 h water absorption rate of 4.82%. The leaching content of Pb and Zn of the sintered ceramsite samples is far less than the limit values of hazardous components in the leachate specified in the relevant standard. This study provides a potential pathway for the reduction, recycling, and environmentally sound utilization of HS-LZT, which is in line with the sustainable development concept of “treating waste with waste.”
Suggested Citation
Ming Li & Chongjie Liao & Qi He & Yifan Yang, 2025.
"Preparation of Lightweight and High-Strength Ceramsite from High-Silicon Lead-Zinc Tailings: A Sustainable Method for Waste Recycling,"
Sustainability, MDPI, vol. 17(10), pages 1-17, May.
Handle:
RePEc:gam:jsusta:v:17:y:2025:i:10:p:4523-:d:1656748
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:17:y:2025:i:10:p:4523-:d:1656748. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.