Management of Tanning Waste from Leather Processing by Anaerobic Digestion Using a Dynamic Method on a Semi-Technical Scale

In the context of climate policy, measures are being taken around the world to reduce pollution. These have been intensified in the areas of transport, industry, and energy, with the goal of zero emissions. The role of the biogas plant in energy transition and as a waste treatment plant for disposal is very important. This article describes research on a dynamic anaerobic digestion (AD) process plant. The subject of this study was leather shavings, which is a problematic waste. The research presented here is intended to demonstrate the decomposition of the flesh in the process, to confirm its biogas yield, and to evaluate the biological and technical parameters of the process. High biochemical stability was achieved for each of the tests evaluated, and no specific technical requirements were demonstrated. The only technical aspect to be addressed during operation was sedimentation, which can be solved by preparing the mixture earlier or by changing the mixing method. This made it reasonable to investigate the material further in the context of an industrial project. The characteristics of protein degradation in the AD process resulted in a high methane content in the biogas, above 65%. It was also observed that the long conditioning time of biogas in the gas cushion favourably affected the proportion of methane in biogas. Analytical results confirmed 77.5% methane content, which was a very good result. This paper presents the results of a surprising effect of chromium, primarily Cr (III), on the performance of anaerobic digestion.