IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v16y2024i12p5256-d1418799.html
   My bibliography  Save this article

Optimization Design of Indoor Environmental Ventilation in Buildings Based on Improved SVR-PSO Model

Author

Listed:
  • Mengmeng Han

    (Department of Industrial Design, Pukyong National University, 45, Yongso-ro, Nam-Gu, Busan 48513, Republic of Korea)

  • Chunxiao Zhang

    (Department of Industrial Design, Pukyong National University, 45, Yongso-ro, Nam-Gu, Busan 48513, Republic of Korea)

  • Sihui Yin

    (Department of Industrial Design, Pukyong National University, 45, Yongso-ro, Nam-Gu, Busan 48513, Republic of Korea)

  • Jingjing Jia

    (Department of Industrial Design, Pukyong National University, 45, Yongso-ro, Nam-Gu, Busan 48513, Republic of Korea)

  • Chulsoo Kim

    (Department of Industrial Design, Pukyong National University, 45, Yongso-ro, Nam-Gu, Busan 48513, Republic of Korea)

Abstract

As the growth of society and the continuous upgrading of people’s living standards increase, people’s requirements for indoor environment are also increasing. To optimize the ventilation methods inside buildings, a numerical simulation method was used to construct numerical simulations of airflow organization and aerosol diffusion, and based on this model, better ventilation methods were determined. To optimize the determined better ventilation method, a multi-constraint optimization model was constructed using infection probability, thermal comfort, energy utilization coefficient, and velocity non-uniformity coefficient. The ventilation method was optimized through multi-objective constraints. To solve the optimization model, an optimized particle swarm algorithm was studied and designed. The results showed that under the “air rain” flow field, the maximum values of aerosol particles at the human body, bed surface, and outlet were 171, 769, and 19,973, respectively, while the minimum values were 4, 169, and 2197, respectively. The “air rain” flow field is a better ventilation method. The maximum and minimum values of the original non-uniformity coefficient were 0.44 and 0.08, respectively. After optimization by the particle swarm optimization algorithm, the maximum and minimum predicted non-uniformity coefficients were 0.457 and 0.08, respectively. The original value and predicted value are very close. The numerical model and algorithm constructed by the research institute are effective. The algorithm designed by the research institute can provide technical support for multi-objective optimization of indoor ventilation methods.

Suggested Citation

  • Mengmeng Han & Chunxiao Zhang & Sihui Yin & Jingjing Jia & Chulsoo Kim, 2024. "Optimization Design of Indoor Environmental Ventilation in Buildings Based on Improved SVR-PSO Model," Sustainability, MDPI, vol. 16(12), pages 1-14, June.
  • Handle: RePEc:gam:jsusta:v:16:y:2024:i:12:p:5256-:d:1418799
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/16/12/5256/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/16/12/5256/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:16:y:2024:i:12:p:5256-:d:1418799. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.