IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v16y2023i1p231-d1308059.html
   My bibliography  Save this article

The Sustainability of Using DuraCrete as Cement Additive to Estuarine Soft Soil Stabilization

Author

Listed:
  • Ali N. Al-Gemeel

    (College of Engineering, University of Babylon, Babylon 51002, Iraq)

  • Noor Al-Hayo

    (Griffith School of Engineering, Griffith University, Brisbane 4215, Australia)

  • Dominic E. L. Ong

    (Griffith School of Engineering, Griffith University, Brisbane 4215, Australia)

  • Yan Zhuge

    (UniSA STEM, University of South Australia, Adelaide 5095, Australia)

Abstract

Large areas of estuarine deposits exist on the coastal plains of the southeast Queensland coast with a countered depth of up to 30 m. These deposits are categorized as sediments that originated during the Holocene Age. The sediments have not been consolidated or subjected to considerable pressure since the end of the Ice Age. The structure of these deposits consists of large ratios of porosity, causing high soil compressibility, which lowers the bearing capacity of the soils. Therefore, the soils of the region cannot maintain sufficient support for construction loads, and consequent malfunctions could occur in short-term and long-term periods. The objective of this paper is to investigate the suitability of new soil stabilization additives in the southeast Queensland region and the optimum additive content of cementitious materials and an advanced mixing modifier branded as DuraCrete. A combination of Portland cement and DuraCrete was used as a soil additive. Three DuraCrete-to-cement ratios were used: 2%, 3%, and 4% by weight. Soil collected from the Port of Brisbane region was treated by adding the additives as a percentage of its weight; four percentages were considered: 10%, 20%, 25%, and 30% for each combination of additives. The performance of the treated soils was examined under unconfined compression after 28 days of curing. The results revealed that increases in the unconfined compressive strength were detected as DuraCrete was added to the mixtures. For 30% additives, increases of about 15%, 34%, and 17% were detected when DuraCrete was added as 2%, 3%, and 4%, respectively. The results also revealed that 3% DuraCrete content provided significant stabilization compared to 2% and 4% for 25% and 30% additive-treated soils; such behavior was also observed for the specimens of 25% content of additives. Additionally, DuraCrete can be considered a promising material that can be combined with cement to obtain the desired stabilization of soft soils.

Suggested Citation

  • Ali N. Al-Gemeel & Noor Al-Hayo & Dominic E. L. Ong & Yan Zhuge, 2023. "The Sustainability of Using DuraCrete as Cement Additive to Estuarine Soft Soil Stabilization," Sustainability, MDPI, vol. 16(1), pages 1-20, December.
  • Handle: RePEc:gam:jsusta:v:16:y:2023:i:1:p:231-:d:1308059
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/16/1/231/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/16/1/231/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:16:y:2023:i:1:p:231-:d:1308059. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.