IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i3p2311-d1048068.html
   My bibliography  Save this article

Exploring the Effect of Different Waste Fillers in Manufactured Sustainable Plastic Aggregates Matrix on the Structural Lightweight Green Concrete

Author

Listed:
  • Fahad K. Alqahtani

    (Department of Civil Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia)

  • Idrees Zafar

    (Cathodic Protection Department, Saith Limited, ICM, Yeoman Road, Ringwood, Hampshire BH24 3FA, UK)

Abstract

The infrastructure demands for mega cities, urbanization and environmental concerns are pushing for smart and sustainable solutions. Structural lightweight concrete is gaining popularity in the concrete industry because of its intrinsic properties of resisting the load and being lighter in weight. Therefore, in this study, a green structural lightweight concrete was targeted by fabricating a plastic-based aggregate incorporating different industrial by-products to reduce the carbon tracks along with an alternate lightweight structural material. Thus, the compatibility of the different industrially by-products (dune dust, fly ash, and quarry dust) with plastic to produce a sustainable structural lightweight aggregate was evaluated in this study. The major physical characteristics of manufactured aggregates along with fresh, hardened, and durability properties of concretes were studied. Results revealed that altering the filler type had altered the texture and size of the developed aggregate. The aggregates developed with dune dust showed the largest particle size, bulk specific gravity, and strength while the ones with fly ash had the smallest size and water absorption. The decrease in the strength was found to be 24.7, 43.6, and 29% for dune dust, fly ash, and quarry dust respectively, once the filler percentage was increased from 50 to 70%. Additionally, all the concretes incorporating developed aggregates have evidently demonstrated their likely usage in structural lightweight applications by complying with ASTM C330/C330M-14 for compressive, flexural, and splitting tensile strength values, in addition to the improved durability behavior.

Suggested Citation

  • Fahad K. Alqahtani & Idrees Zafar, 2023. "Exploring the Effect of Different Waste Fillers in Manufactured Sustainable Plastic Aggregates Matrix on the Structural Lightweight Green Concrete," Sustainability, MDPI, vol. 15(3), pages 1-23, January.
    • Handle: RePEc:gam:jsusta:v:15:y:2023:i:3:p:2311-:d:1048068
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/3/2311/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/3/2311/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:3:p:2311-:d:1048068. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.