Prediction for the Adsorption of Low-Concentration Toluene by Activated Carbon

Activated carbon filters are widely used to remove gaseous pollutants in order to guarantee a healthy living environment. The standard method for evaluating the adsorption performance of filters is conducted at ~100 ppm. Although this accelerates the test and avoids the high requirements of the test device, it is still far from the contaminant concentration in the indoor environment, and adsorbents in practical application may show different capabilities. Therefore, this study compared several methods for predicting the adsorption performance of activated carbon and recommended a procedure based on the Wheeler–Jonas model to estimate the breakthrough curve at low concentrations using experimental data at high concentrations. The results showed that the Langmuir model and Wood–Lodewyckx correlation were the most suitable for obtaining the equilibrium adsorption capacity and mass transfer coefficient, which are critical parameters in the Wheeler–Jonas model. The predicted service life was derived from the breakthrough curve. A modification method based on a relationship with inlet gas concentration was proposed to reduce the prediction deviation of the service life. After modification, the maximum deviation was within two hours and the relative deviation was no more than 7%.