IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i3p1314-d732380.html
   My bibliography  Save this article

Modelling Treated Laundry Greywater Reuse for Irrigation Using an Affordable Treatment Method and Seed Germination Test

Author

Listed:
  • Camila C. A. Cardoso

    (Department of Environmental Engineering, University of Debrecen, H-4032 Debrecen, Hungary)

  • Ildiko Bodnar

    (Department of Environmental Engineering, University of Debrecen, H-4032 Debrecen, Hungary)

Abstract

A potential solution in areas facing water shortages is greywater (GW) reuse. GW is produced in bathrooms, laundry rooms, and kitchens of households. With proper treatment, it can be an alternative source for the agriculture sector, which consumes approximately 70% of the world’s water. This paper represents the characterization of synthetic laundry GW fraction (LGW), its treatment and modelling of treated LGW reuse for irrigation using a seed germination test. LGW’s constant quality (pH = 8.0 ± 0.3, turbidity = 174 ± 73 NTU, BOD 5 = 300 ± 60 mgL −1 , TOC = 162 ± 40 mgL −1 ) is suitable for testing the treatment method’s efficiency. Coagulation–flocculation, applying iron(III) chloride and sand filtration as a simple treatment combination, generates good-quality irrigation water (pH = 7.27 ± 0.23, turbidity = 0.6 ± 0.4 NTU, BOD 5 = 17 ± 8 mgL −1 , TOC = 16 ± 6 mgL −1 ). Seed germination tests with different waters, and elemental analysis of water, roots, and stems of the plants were done to verify the plants’ quality. The sodium adsorption ratio (SAR) for the raw LGW (SAR = 4.06) was above the threshold (<3) for safe irrigation, thus it is not recommended for this purpose. Based on the elemental analysis results and SAR value of treated LGW (SAR = 2.84), it can potentially be used for irrigation purposes.

Suggested Citation

  • Camila C. A. Cardoso & Ildiko Bodnar, 2022. "Modelling Treated Laundry Greywater Reuse for Irrigation Using an Affordable Treatment Method and Seed Germination Test," Sustainability, MDPI, vol. 14(3), pages 1-14, January.
    • Handle: RePEc:gam:jsusta:v:14:y:2022:i:3:p:1314-:d:732380
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/3/1314/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/14/3/1314/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:3:p:1314-:d:732380. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.