IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i22p14942-d970142.html
   My bibliography  Save this article

Environmental Performance of Alternative Hospital Waste Management Strategies Using Life Cycle Assessment (LCA) Approach

Author

Listed:
  • Muhammad Hammad Mushtaq

    (Centre for Energy Research & Development (CERAD), University of Engineering & Technology, Lahore 39020, Pakistan)

  • Fahad Noor

    (Centre for Energy Research & Development (CERAD), University of Engineering & Technology, Lahore 39020, Pakistan
    Department of Mechanical Engineering, New Campus, University of Engineering and Technology, Lahore 39020, Pakistan)

  • M. A. Mujtaba

    (Department of Mechanical Engineering, New Campus, University of Engineering and Technology, Lahore 39020, Pakistan)

  • Salman Asghar

    (Department of Product and Industrial Design (PID), University of Engineering and Technology (UET), Lahore 54890, Pakistan)

  • Abdulfatah Abdu Yusuf

    (Department of Mechanical Engineering, University of Liberia, Monrovia 1000, Liberia)

  • Manzoore Elahi M. Soudagar

    (Department of Mechanical Engineering, School of Technology, Glocal University, Delhi-Yamunotri Marg, SH-57, Mirzapur Pole, Saharanpur 247121, India)

  • Abrar Hussain

    (Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate Tee 5, 12616 Tallinn, Estonia)

  • Mohamed Fathy Badran

    (Department of Mechanical Engineering, Faculty of Engineering & Technology, Future University in Egypt, New Cairo 11845, Egypt)

  • Kiran Shahapurkar

    (School of Mechanical, Chemical and Materials Engineering, Adama Science and Technology University, Adama 1888, Ethiopia)

Abstract

The growing population in urban areas generates large volumes of hospital waste which intensifies the problem of hospital waste management in developing countries. This study is designed to evaluate environmental impacts associated with hospital waste management scenarios using life cycle assessment (LCA) approach. Two scenarios were designed to describe the current practices: (scenario A) and an integrated approach (scenario B), which includes segregation and recycling of hospital waste. Data were collected from five public hospitals located in the district of Sheikhupura, Pakistan. The collected hospital waste was quantified and categorized on a daily basis for five consecutive months (October 2020 to February 2021). The functional unit was defined as one tonne of hospital waste. System boundaries for two scenarios include segregation, transportation, treatment and disposal of hospital waste. After defining functional unit and system boundaries, LCA was conducted using the IGES-GHG simulator. The scenarios were evaluated using common parameter, i.e., greenhouse gas (GHG) emissions. Scenario A and scenario B resulted in net GHG emissions of 1078.40 kg CO 2 -eq. per tonne of waste and 989.31 kg CO 2 -eq. per tonne of waste, respectively. Applying an integrated approach, it would be possible to mitigate GHG emissions of 37,756.44 kg CO 2 -eq. per tonne of waste annually and to recover some materials such as glass, paper, plastic and metals. Therefore, implementing an integrated approach for the management of hospital waste will progress the entire system towards sustainability. The findings of this study can be used for future research and policymaking.

Suggested Citation

  • Muhammad Hammad Mushtaq & Fahad Noor & M. A. Mujtaba & Salman Asghar & Abdulfatah Abdu Yusuf & Manzoore Elahi M. Soudagar & Abrar Hussain & Mohamed Fathy Badran & Kiran Shahapurkar, 2022. "Environmental Performance of Alternative Hospital Waste Management Strategies Using Life Cycle Assessment (LCA) Approach," Sustainability, MDPI, vol. 14(22), pages 1-16, November.
    • Handle: RePEc:gam:jsusta:v:14:y:2022:i:22:p:14942-:d:970142
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/22/14942/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/14/22/14942/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Md. Sohrab Hossain & Venugopal Balakrishnan & Nik Norulaini Nik Ab Rahman & Md. Zaidul Islam Sarker & Mohd Omar Ab Kadir, 2012. "Treatment of Clinical Solid Waste Using a Steam Autoclave as a Possible Alternative Technology to Incineration," IJERPH, MDPI, vol. 9(3), pages 1-13, March.
    2. Minas Minoglou & Spyridoula Gerassimidou & Dimitrios Komilis, 2017. "Healthcare Waste Generation Worldwide and Its Dependence on Socio-Economic and Environmental Factors," Sustainability, MDPI, vol. 9(2), pages 1-13, February.
    3. Chilton, Tom & Burnley, Stephen & Nesaratnam, Suresh, 2010. "A life cycle assessment of the closed-loop recycling and thermal recovery of post-consumer PET," Resources, Conservation & Recycling, Elsevier, vol. 54(12), pages 1241-1249.
    4. Komly, Claude-Emma & Azzaro-Pantel, Catherine & Hubert, Antoine & Pibouleau, Luc & Archambault, Valérie, 2012. "Multiobjective waste management optimization strategy coupling life cycle assessment and genetic algorithms: Application to PET bottles," Resources, Conservation & Recycling, Elsevier, vol. 69(C), pages 66-81.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. María Carmen Carnero, 2020. "Waste Segregation FMEA Model Integrating Intuitionistic Fuzzy Set and the PAPRIKA Method," Mathematics, MDPI, vol. 8(8), pages 1-29, August.
    2. Thobile Zikhathile & Harrison Atagana & Joseph Bwapwa & David Sawtell, 2022. "A Review of the Impact That Healthcare Risk Waste Treatment Technologies Have on the Environment," IJERPH, MDPI, vol. 19(19), pages 1-18, September.
    3. Kang, DongHo & Auras, Rafael & Singh, Jay, 2017. "Life cycle assessment of non-alcoholic single-serve polyethylene terephthalate beverage bottles in the state of California," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 45-52.
    4. Georgios Giakoumakis & Dorothea Politi & Dimitrios Sidiras, 2021. "Medical Waste Treatment Technologies for Energy, Fuels, and Materials Production: A Review," Energies, MDPI, vol. 14(23), pages 1-30, December.
    5. Ali Ebadi Torkayesh & Hadi Rezaei Vandchali & Erfan Babaee Tirkolaee, 2021. "Multi-Objective Optimization for Healthcare Waste Management Network Design with Sustainability Perspective," Sustainability, MDPI, vol. 13(15), pages 1-17, July.
    6. María Carmen Carnero, 2020. "Fuzzy TOPSIS Model for Assessment of Environmental Sustainability: A Case Study with Patient Judgements," Mathematics, MDPI, vol. 8(11), pages 1-43, November.
    7. Else F. de Ridder & Herman J. Friedericy & Anne C. van der Eijk & Jenny Dankelman & Frank Willem Jansen, 2022. "A New Method to Improve the Environmental Sustainability of the Operating Room: Healthcare Sustainability Mode and Effect Analysis (HSMEA)," Sustainability, MDPI, vol. 14(21), pages 1-15, October.
    8. Hunt, Emily J. & Zhang, Chenlong & Anzalone, Nick & Pearce, Joshua M., 2015. "Polymer recycling codes for distributed manufacturing with 3-D printers," Resources, Conservation & Recycling, Elsevier, vol. 97(C), pages 24-30.
    9. Adis Puška & Željko Stević & Dragan Pamučar, 2022. "Evaluation and selection of healthcare waste incinerators using extended sustainability criteria and multi-criteria analysis methods," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(9), pages 11195-11225, September.
    10. Anastasios Sepetis & Paraskevi N. Zaza & Fotios Rizos & Pantelis G. Bagos, 2022. "Identifying and Predicting Healthcare Waste Management Costs for an Optimal Sustainable Management System: Evidence from the Greek Public Sector," IJERPH, MDPI, vol. 19(16), pages 1-20, August.
    11. Kunle Ibukun Olatayo & Paul T. Mativenga & Annlizé L. Marnewick, 2023. "Plastic value chain and performance metric framework for optimal recycling," Journal of Industrial Ecology, Yale University, vol. 27(2), pages 601-623, April.
    12. Sakchai Pattra & Cung Nawl Thawng & Sanhawat Chaiwong, 2023. "“Four Joints of Power” Innovation of Community Involvement in Medical Waste Management of Bed-Bound Patients in Thailand," Sustainability, MDPI, vol. 15(2), pages 1-17, January.
    13. Lagioia, Giovanni & Calabrò, Grazia & Amicarelli, Vera, 2012. "Empirical study of the environmental management of Italy's drinking water supply," Resources, Conservation & Recycling, Elsevier, vol. 60(C), pages 119-130.
    14. Chen, Chung-Chiang & Chen, Yi-Tui, 2013. "Energy recovery or material recovery for MSW treatments?," Resources, Conservation & Recycling, Elsevier, vol. 74(C), pages 37-44.
    15. Komly, Claude-Emma & Azzaro-Pantel, Catherine & Hubert, Antoine & Pibouleau, Luc & Archambault, Valérie, 2012. "Multiobjective waste management optimization strategy coupling life cycle assessment and genetic algorithms: Application to PET bottles," Resources, Conservation & Recycling, Elsevier, vol. 69(C), pages 66-81.
    16. Rajendran, Saravanan & Scelsi, Lino & Hodzic, Alma & Soutis, Constantinos & Al-Maadeed, Mariam A., 2012. "Environmental impact assessment of composites containing recycled plastics," Resources, Conservation & Recycling, Elsevier, vol. 60(C), pages 131-139.
    17. Michael Martin & Sjoerd Herlaar & Aiden Jönsson & David Lazarevic, 2022. "From Circular to Linear? Assessing the Life Cycle Environmental and Economic Sustainability of Steel and Plastic Beer Kegs," Circular Economy and Sustainability,, Springer.
    18. Abrar Mahjoob & Yousef Alfadhli & Vincent Omachonu, 2023. "Healthcare Waste and Sustainability: Implications for a Circular Economy," Sustainability, MDPI, vol. 15(10), pages 1-20, May.
    19. Jayakrishna Kandasamy & Yatin P. Kinare & Miheer T. Pawar & Abhijit Majumdar & Vimal K.E.K. & Rohit Agrawal, 2022. "Circular economy adoption challenges in medical waste management for sustainable development: An empirical study," Sustainable Development, John Wiley & Sons, Ltd., vol. 30(5), pages 958-975, October.
    20. Joana C. Prata & Ana L. Patrício Silva & João P. da Costa & Catherine Mouneyrac & Tony R. Walker & Armando C. Duarte & Teresa Rocha-Santos, 2019. "Solutions and Integrated Strategies for the Control and Mitigation of Plastic and Microplastic Pollution," IJERPH, MDPI, vol. 16(13), pages 1-19, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:22:p:14942-:d:970142. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.