IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i15p9501-d878935.html
   My bibliography  Save this article

Characterisation of Mg-Al Hydrotalcite and Surfactant-Modified Bentonite Nano Clays for the Treatment of Acid Mine Drainage

Author

Listed:
  • Silindile Gumede

    (Institute of Systems Science, Durban University of Technology, Durban 4001, South Africa)

  • Paul Musonge

    (Institute of Systems Science, Durban University of Technology, Durban 4001, South Africa
    Faculty of Engineering, Mangosuthu University of Technology, Durban 4031, South Africa)

Abstract

The presence of acid mine drainage (AMD) poses health risks to humans and other living organisms. While much research on AMD has been conducted, the absence of a widely accepted AMD treatment technology makes it an ongoing topic for further exploration. The present study explored the potential of nano-clay adsorbents for the removal of iron and manganese from AMD. The two nano-clay adsorbents used in this study were synthetic hydrotalcite (HT) and modified bentonite (MB) clays. The adsorption media were characterised before and after adsorption using X-ray diffraction (XRD), Fourier transforms infrared (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET), and Scanning Electron Microscope (SEM) to explain the adsorption mechanisms. To investigate the efficiency of the clays, batch adsorption studies were carried out by varying the concentration, pH, and time. To establish the kind of adsorption mechanism that occurred, Langmuir and Freundlich isotherms were applied. It was found from characterisation results that HT and MB contained hydroxyl and carbonyl functional groups responsible for surface complexation mechanisms; XRD showed that isomorphic substitution and precipitation also occurred in adsorption using HT. The specific surface area for modified bentonite and hydrotalcite as determined by BET was 3.13 and 44.7 m 2 /g respectively. The XRD and the SEM results showed that HT was crystalline while MB was amorphous, probably due to the irregular stacking of the surfactant. It was observed that the adsorbent deprotonated as pH increased, resulting in an increase in metal removal. The Langmuir isotherm provided the best monolayer adsorption capacity with R L < 1 and correlation coefficients ranged from 0.95 to 0.99 for both adsorbents.

Suggested Citation

  • Silindile Gumede & Paul Musonge, 2022. "Characterisation of Mg-Al Hydrotalcite and Surfactant-Modified Bentonite Nano Clays for the Treatment of Acid Mine Drainage," Sustainability, MDPI, vol. 14(15), pages 1-18, August.
    • Handle: RePEc:gam:jsusta:v:14:y:2022:i:15:p:9501-:d:878935
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/15/9501/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/14/15/9501/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Carolina Rodríguez & Camila Tapia & Enzo Leiva-Aravena & Eduardo Leiva, 2020. "Graphene Oxide–ZnO Nanocomposites for Removal of Aluminum and Copper Ions from Acid Mine Drainage Wastewater," IJERPH, MDPI, vol. 17(18), pages 1-18, September.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Veronika Prepilková & Juraj Poništ & Marián Schwarz & Dagmar Samešová, 2022. "Possibilities of remediation of neutral mine drainage - Removal and recovery of potentially hazardous elements," Soil and Water Research, Czech Academy of Agricultural Sciences, vol. 17(4), pages 251-267.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:15:p:9501-:d:878935. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.