IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i15p9149-d871933.html
   My bibliography  Save this article

Determination of Air Pollutants: Application of a Low-Cost Method for Preparation of VOC Mixtures at Known Concentration

Author

Listed:
  • Lorenzo Sartore

    (Politecnico di Milano, Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Piazza Leonardo da Vinci 32, 20133 Milano, Italy)

  • Elisa Polvara

    (Politecnico di Milano, Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Piazza Leonardo da Vinci 32, 20133 Milano, Italy)

  • Marzio Invernizzi

    (Politecnico di Milano, Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Piazza Leonardo da Vinci 32, 20133 Milano, Italy)

  • Selena Sironi

    (Politecnico di Milano, Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Piazza Leonardo da Vinci 32, 20133 Milano, Italy)

Abstract

Gas chromatography (GC) is an excellent tool to obtain qualitative and quantitative information on volatile organic compounds (VOCs) present in gaseous samples. However, to carry out an appropriate quantitative analysis of unknown samples, the use of known concentration gas mixtures, to exploit as standards, is required. Commonly, these mixtures are obtained from cylinders of compressed gas at known concentrations: this involves a considerable economic outlay and problems relating to their handling. This paper aims to apply a method, proposed as a versatile, simple, and economical alternative to the use of such cylinders, for preparing gaseous calibration standards useful to obtain calibration curves for quantification of air pollutants. In addition, the operative limits of this method were investigated. The method involves the continuous injection of volatile compounds in liquid form into a stream of neutral gas, such as air or nitrogen. Exploiting the high volatility of the compounds used, it is possible to generate a continuous gas stream containing the chosen VOC at the desired concentration based on the mass balance of the system. This method proved to be suitable for compounds with volatility ranging from 36 kPa to 0.1 kPa at 293 K and it showed relative bias and relative standard deviation (RSD) values of less than 16% and 8%, respectively. The described dynamic method results are repeatable and accurate. It can be used effectively for compounds with vapour pressure values within the stated limits and provides a more versatile and cost-effective alternative to compressed gas cylinders.

Suggested Citation

  • Lorenzo Sartore & Elisa Polvara & Marzio Invernizzi & Selena Sironi, 2022. "Determination of Air Pollutants: Application of a Low-Cost Method for Preparation of VOC Mixtures at Known Concentration," Sustainability, MDPI, vol. 14(15), pages 1-11, July.
  • Handle: RePEc:gam:jsusta:v:14:y:2022:i:15:p:9149-:d:871933
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/15/9149/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/14/15/9149/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:15:p:9149-:d:871933. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.