IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2021i1p290-d712687.html
   My bibliography  Save this article

Synergistic Study of Solid Lubricant Nano-Additives Incorporated in canola oil for Enhancing Energy Efficiency and Sustainability

Author

Listed:
  • Soumya Sikdar

    (Department of Mechanical Engineering, University of Nevada, Reno, NV 89557, USA)

  • Md Hafizur Rahman

    (Department of Mechanical Engineering, University of Nevada, Reno, NV 89557, USA)

  • Pradeep L. Menezes

    (Department of Mechanical Engineering, University of Nevada, Reno, NV 89557, USA)

Abstract

In recent years, with the development of eco-friendly lubricants, different vegetable oils have been studied and found to improve the overall tribological performance compared to petroleum-based oils. Being one of the commonly used vegetable oils, canola oil has become popular due to its non-toxicity and low cost. However, this bio-lubricant lacks tribological performance compared to petroleum-based oils. To improve its performance, sustainable solid additives such as graphene nanoplatelet (GNP) and hexagonal boron nitride (hBN) have recently gained the researcher’s attention. While incorporating nanomaterials in the oil as additives is a promising way to improve base oil’s performance, the excessive use of nanoparticles can introduce undesirable effects. This study investigated canola oil’s tribological performances with the addition of 0.5, 1.0, 1.5, and 2.0 wt.% GNP and 0.5, 1.0, and 1.5 wt.% hBN nanoparticles. The dynamic viscosities of these seven settings showed higher viscosity for GNP-incorporated oils compared to that with hBN. The boundary lubrication regime was targeted for the coefficient of friction (COF) and wear analyses during each pin on the disk test. It was observed that for the GNP, 1.5 wt.% provided the minimum COF (52% less than base oil), whereas, for the hBN, 1.0 wt.% provided the lowest (40% less than base oil) values. Based on these insights, three nano lubricant mixtures were formulated by incorporating both GNP and hBN settings in different ratios. These mixtures provided an optimum positive synergy by reducing 56% friction and 90% wear compared to the base oil. These percentage values were significantly more compared to both GNP and hBN based lubricants in their individual settings. These improvements in the mixture were due to a composite film formed which protected the interacting surfaces and also due to the polishing mechanisms. Therefore, incorporating both these nanoparticles in canola oil could reduce friction and wear and thus help in better energy conservation.

Suggested Citation

  • Soumya Sikdar & Md Hafizur Rahman & Pradeep L. Menezes, 2021. "Synergistic Study of Solid Lubricant Nano-Additives Incorporated in canola oil for Enhancing Energy Efficiency and Sustainability," Sustainability, MDPI, vol. 14(1), pages 1-16, December.
  • Handle: RePEc:gam:jsusta:v:14:y:2021:i:1:p:290-:d:712687
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/1/290/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/14/1/290/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2021:i:1:p:290-:d:712687. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.