IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v13y2021i14p7716-d591876.html
   My bibliography  Save this article

Identification and Investigation of Subsidence Areas to Mitigate Karstic Risks in Urbanized Areas of Madrid, Spain: A Case Study

Author

Listed:
  • Eugenio Sanz Pérez

    (Laboratorio de Geología, Departamento de Ingeniería y Morfología del Terreno, Universidad Politécnica de Madrid, 28040 Madrid, Spain)

  • Cesar Sanz Riaguas

    (Desarrollos Logísticos y Fomento de Suelo S.L. (DELFOS), C. de Narvaez, 15, 28009 Madrid, Spain)

Abstract

A multidisciplinary investigation was carried out in a karstic depression in a housing development under construction in Madrid to assess its stability. It was found that it is a small basin within a larger depression as a result of subsidence accumulated during the Quaternary. Subsidence has built up progressively in the Miocene clay cap and bedrock due to the underlying dissolution of gypsum rich intercalations. The preferential circulation of the dissolving subsurface flow is along a fault conditioned by subsidence, the formation of an elongated syncline along the fracture, and the alluvial basin. During the Pleistocene, a former lagoon zone was formed in this subsiding area; it was also a groundwater discharge zone. The decrease in recent times is very small and could be evaluated to be about 0.4 mm/year, and affects the alluvial zone and along the furrow of a fault zone, where the maximum average rate of subsidence would be 1.4 mm/year. This has led to the development of a relatively strong alluvium. It seems that under the alluvial deposits, a slow and diffuse dissolution is taking place of the shallower clayey gypsiferous levels, free of hypersoluble mineral species; this is somewhat more intense in the fault zone, which is more active hydrodynamically, where groundwater velocity is higher. Microgravimetry surveys indicate that only 5% of the area hidden under the alluvium shows anomalies, interpreted as residual soft clayey masses, or anomalous alluvial fillings of old dissolution voids. These pockets (“bolsones”), have dimensions of no more than 20 × 20 m and depths below 20 m. These measurements have been confirmed by boreholes and are the only points that would require special attention in the future construction of the urbanization. The urbanization work, in full development, is implementing solutions aimed at the stability of the road in the strips of alluvial studied.

Suggested Citation

  • Eugenio Sanz Pérez & Cesar Sanz Riaguas, 2021. "Identification and Investigation of Subsidence Areas to Mitigate Karstic Risks in Urbanized Areas of Madrid, Spain: A Case Study," Sustainability, MDPI, vol. 13(14), pages 1-19, July.
  • Handle: RePEc:gam:jsusta:v:13:y:2021:i:14:p:7716-:d:591876
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/13/14/7716/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/13/14/7716/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:13:y:2021:i:14:p:7716-:d:591876. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.