IDEAS home Printed from https://ideas.repec.org/a/gam/jresou/v13y2024i3p40-d1354710.html
   My bibliography  Save this article

Removal of 2,4-Dichlorophenoxyacetic Acid from Aqueous Solutions Using Al 2 O 3 /Graphene Oxide Granules Prepared by Spray-Drying Method

Author

Listed:
  • Alexandra Yu. Kurmysheva

    (Laboratory of Electric Current Assisted Sintering Technologies, Moscow State University of Technology “STANKIN”, Vadkovsky per. 1, 127055 Moscow, Russia)

  • Ekaterina Kuznetsova

    (Laboratory of 3D Structural and Functional Engineering, Moscow State University of Technology “STANKIN”, Vadkovsky per. 1, 127055 Moscow, Russia)

  • Marina D. Vedenyapina

    (N. D. Zelinsky Institute of Organic Chemistry, Russian Academy of Sciences, Leninsky Prospect 47, 119991 Moscow, Russia)

  • Pavel Podrabinnik

    (Laboratory of Electric Current Assisted Sintering Technologies, Moscow State University of Technology “STANKIN”, Vadkovsky per. 1, 127055 Moscow, Russia)

  • Nestor Washington Solís Pinargote

    (Laboratory of 3D Structural and Functional Engineering, Moscow State University of Technology “STANKIN”, Vadkovsky per. 1, 127055 Moscow, Russia)

  • Anton Smirnov

    (Laboratory of 3D Structural and Functional Engineering, Moscow State University of Technology “STANKIN”, Vadkovsky per. 1, 127055 Moscow, Russia)

  • Sergey N. Grigoriev

    (Laboratory of Electric Current Assisted Sintering Technologies, Moscow State University of Technology “STANKIN”, Vadkovsky per. 1, 127055 Moscow, Russia)

Abstract

Within this study, aluminum oxide granules with 0.25%vol. of graphene oxide were prepared by a spray-drying method to make an adsorbent for the 2,4-Dichlorophenoxyacetic acid (2,4-D) herbicide removal from aqueous solutions. The obtained adsorbent was studied using infrared spectroscopy, scanning electron microscopy and Raman spectroscopy. The presence of graphene in the spray-dried powder was confirmed. The adsorption removal of 2,4-D using the obtained material was performed at an ambient temperature by varying the process parameters such as pH and adsorption time. The adsorption of 2,4-D was a monolayer chemisorption according to the Langmuir isotherm pattern and a pseudo-second-order kinetic model. The maximum Langmuir adsorption capacity of the monolayer was 35.181 mg/g. The results show that the Al 2 O 3 -0.25%vol. GO powder obtained by spray drying is suitable for the production of adsorbents for toxic herbicides.

Suggested Citation

  • Alexandra Yu. Kurmysheva & Ekaterina Kuznetsova & Marina D. Vedenyapina & Pavel Podrabinnik & Nestor Washington Solís Pinargote & Anton Smirnov & Sergey N. Grigoriev, 2024. "Removal of 2,4-Dichlorophenoxyacetic Acid from Aqueous Solutions Using Al 2 O 3 /Graphene Oxide Granules Prepared by Spray-Drying Method," Resources, MDPI, vol. 13(3), pages 1-11, March.
    • Handle: RePEc:gam:jresou:v:13:y:2024:i:3:p:40-:d:1354710
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2079-9276/13/3/40/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2079-9276/13/3/40/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jresou:v:13:y:2024:i:3:p:40-:d:1354710. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.