IDEAS home Printed from https://ideas.repec.org/a/gam/jijerp/v19y2022i10p5985-d815804.html
   My bibliography  Save this article

Application of Integrated Fixed-Film Activated Sludge in a Conventional Wastewater Treatment Plant

Author

Listed:
  • Magdalena Kuśnierz

    (Institute of Environmental Engineering, Faculty of Environmental Engineering and Geodesy, Wrocław University of Environmental and Life Sciences, Plac Grunwaldzki 24, 50-363 Wrocław, Poland)

  • Magdalena Domańska

    (Institute of Environmental Engineering, Faculty of Environmental Engineering and Geodesy, Wrocław University of Environmental and Life Sciences, Plac Grunwaldzki 24, 50-363 Wrocław, Poland)

  • Kamila Hamal

    (Institute of Environmental Engineering, Faculty of Environmental Engineering and Geodesy, Wrocław University of Environmental and Life Sciences, Plac Grunwaldzki 24, 50-363 Wrocław, Poland)

  • Agnieszka Pera

    (Institute of Environmental Engineering, Faculty of Environmental Engineering and Geodesy, Wrocław University of Environmental and Life Sciences, Plac Grunwaldzki 24, 50-363 Wrocław, Poland)

Abstract

It is often only at the operation stage of a wastewater treatment plant that there is a need to adjust the treatment process in terms of variable hydraulic capacity, increased pollutant load, high/low concentration of suspended biomass, or the unfavorable phenomenon of reduced sedimentation capacity of the activated sludge. One of the ways to improve the treatment process efficiency is to increase the biologically active surface by using bio-carriers in the form of fibers, materials, or bio-balls. This paper presents the results of a wastewater treatment plant operation during the period of six months after the implementation of the integrated fixed-film activated sludge (IFAS) technology. The research showed that microorganisms developed both in the activated sludge and on the fibers, positively influencing the activated sludge condition. During the start-up of the IFAS process, ciliates predominated over the other species. However, as oxygen content was high (2 mg/dm 3 and more) and textile beds were used, the protozoan population developed intensively, and small metazoans became increasingly common. Throughout the research period, nitrifying and phosphorus-accumulating bacteria were observed both in the activated sludge and on the fibers. Between the 59th and 184th day of operation, numerous microorganisms were detected on the fibers and in the activated sludge, testifying to low biological oxygen demand, good aerobic conditions for nitrification, and long sludge age. However, the process seemed to break down after day 72, when the occurrence of metazoan led to reduced sludge production; after day 88, chemical oxygen demand and total suspended solids in the outflow increased, and oligochaetes and rotifers dominated the suspended sludge and fibers. Results also showed that the textile bed and low ammonia concentration became an excellent substrate for the development of Stentor sp. With regard to chemical and biological oxygen demand, total nitrogen- and total phosphorus-effluent concentrations were mostly within the legally permissible limits throughout the 184 days of operation.

Suggested Citation

  • Magdalena Kuśnierz & Magdalena Domańska & Kamila Hamal & Agnieszka Pera, 2022. "Application of Integrated Fixed-Film Activated Sludge in a Conventional Wastewater Treatment Plant," IJERPH, MDPI, vol. 19(10), pages 1-18, May.
  • Handle: RePEc:gam:jijerp:v:19:y:2022:i:10:p:5985-:d:815804
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1660-4601/19/10/5985/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1660-4601/19/10/5985/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jijerp:v:19:y:2022:i:10:p:5985-:d:815804. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.