Author
Listed:
- Ya Cheng
(Key Laboratory of Northwest Resource, Environment and Ecology, Ministry of Education (MOE), Xi’an University of Architecture and Technology, Xi’an 710055, China
Shaanxi Key Laboratory of Environmental Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China)
- Tinglin Huang
(Key Laboratory of Northwest Resource, Environment and Ecology, Ministry of Education (MOE), Xi’an University of Architecture and Technology, Xi’an 710055, China
Shaanxi Key Laboratory of Environmental Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China)
- Lijie Cheng
(Key Laboratory of Northwest Resource, Environment and Ecology, Ministry of Education (MOE), Xi’an University of Architecture and Technology, Xi’an 710055, China
Shaanxi Key Laboratory of Environmental Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China)
- Junbin Wu
(Key Laboratory of Northwest Resource, Environment and Ecology, Ministry of Education (MOE), Xi’an University of Architecture and Technology, Xi’an 710055, China
Shaanxi Key Laboratory of Environmental Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China)
Abstract
The high concentration of ammonium (NH 4 + -N) and manganese (Mn 2+ ) in underground water poses a major problem for drinking water treatment plants. Effective catalytic oxidative removal of NH 4 + -N and Mn 2+ by iron-manganese co-oxide film (MeO x ) filters was first developed by our group in a previous study. In this study, several identical pilot-scale filters were employed to optimize the start-up process for simultaneous removal of NH 4 + -N and Mn 2+ from potable water supplies. Experiments were conducted to assess the influence of Mn 2+ concentration, Fe 2+ concentration, filtration rate and dosing time on the start-up period of the filter. Results demonstrated that the ability of the filter to remove completely 1.5 mg/L NH 4 + -N could be achieved on the sixth day at the soonest and the removal of Mn 2+ could reach 1 mg/L by the 18th day. Filter R3 feeding with 1 mg/L Fe 2+ , 2 mg/L Mn 2+ and 3.5 mg/L MnO 4 − during the start-up period exhibited the optimum NH 4 + -N and Mn 2+ removal effect. Short dosing time was not conducive to attaining full NH 4 + -N removal in filters, especially the activity of NO 2 − -N conversion to NO 3 − -N. The compositional analysis and element distribution analysis results demonstrated that there was an abundance of C, O, Mn, Mg, Fe, Ca and Si across the entire area of the surface of the filter media and the elemental distribution was homogeneous, which was different from the biofilter media. Knowledge-guided performance optimization of the active iron-manganese co-oxide could pave the way for its future technological use.
Suggested Citation
Ya Cheng & Tinglin Huang & Lijie Cheng & Junbin Wu, 2018.
"Study on the Factors Affecting the Start-Up of Iron-Manganese Co-Oxide Filters for Ammonium and Manganese Removal from Groundwater,"
IJERPH, MDPI, vol. 15(9), pages 1-14, August.
Handle:
RePEc:gam:jijerp:v:15:y:2018:i:9:p:1822-:d:165387
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jijerp:v:15:y:2018:i:9:p:1822-:d:165387. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.