Sinusoidal Condenser Corrugations for Condition-Dependent Enhancement of Single-Loop Pulsating Heat Pipes

Pulsating heat pipes (PHPs) are promising passive heat-transfer devices for compact thermal management; however, their performance is highly sensitive to channel geometry. In particular, the operating-condition-dependent influence of sinusoidal corrugation amplitude on the condenser side remains unclear, despite its importance for oscillation regulation and heat dissipation. This numerical study investigates a single-loop PHP with sinusoidally corrugated condensers (A = 0.25 and 0.5 mm) under heat fluxes of 5000–12,500 W/m 2 and filling ratios of 40–60%, using a uniform-diameter PHP as the baseline. The results show that the configuration with A = 0.25 mm exhibits better start-up performance, especially at low heat fluxes, whereas both corrugated configurations provide better thermal performance than the baseline. At a filling ratio of 50%, the thermal-resistance reductions for A = 0.25 and A = 0.5 mm are 14.5% and 9.2% at 5000 W/m 2 and 8.4% and 10.5% at 12,500 W/m 2 , respectively. An operating-condition-dependent amplitude-matching relationship is identified: The smaller amplitude is more favorable for start-up under weak driving conditions, whereas the larger amplitude tends to provide lower thermal resistance and higher equivalent thermal conductivity under strong driving conditions. These findings provide useful guidance for condenser-geometry optimization in single-loop PHPs.