Thermodynamic Analysis of Combined-Cycle Power Plants Incorporating an Organic Rankine Cycle and Supplementary Burners

Emissions reduction and energy saving at thermal power plants are crucial for energy development. This paper presents the results of thermodynamic analysis and optimization of thermal circuits of combined-cycle power plants incorporating an organic Rankine cycle and supplementary burners. It is established that at a power unit with GTE-170, the transition from a binary cycle with a double-circuit waste heat boiler to a trinary one leads to an increase in net efficiency by 0.79%. It is established that in the trinary cycle, fuel afterburning in the exhaust-gas environment leads to an increase in the net capacity of the power plant: the increase is up to 4.1% with an increase in the degree of afterburning by 0.1 at a steam temperature of 515 °C. It was revealed that the introduction of intermediate superheat provides an increase in the efficiency of the binary cycle by an average of 0.2–3%, and of the trinary cycle by 2–4%, with a change in the degree of afterburning from 0 to 0.5 at an initial steam temperature of 515 °C. The use of supplementary combustion and the organic Rankine cycle make it possible to reduce carbon dioxide emissions in combined-cycle power plants. Compared to a single-pressure combined cycle, the ORC-integrated configuration reduces specific CO 2 emissions by more than 7.5%, while supplementary fuel combustion with an increased steam inlet temperature results in a reduction of up to 10%.