IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i24p6471-d1550245.html
   My bibliography  Save this article

Study on the Influence of an Internal Stiffening System on the Structural Strength of the Semi-Submersible Structures for a Floating Offshore Wind Turbine

Author

Listed:
  • Hao Yu Dou

    (Department of Naval Architecture and Ocean Engineering, Kunsan National University, Gunsan 54150, Republic of Korea)

  • Han Koo Jeong

    (Department of Naval Architecture and Ocean Engineering, Kunsan National University, Gunsan 54150, Republic of Korea)

  • Jian Lun Jiang

    (Department of Naval Architecture and Ocean Engineering, Kunsan National University, Gunsan 54150, Republic of Korea)

Abstract

This study presents the development and comparative analysis of a new Y-type floating offshore wind turbine platform based on the existing T-type model. Utilizing advanced simulation tools, such as MSC, Patran and Nastran 2022.3, FEGate For Ship 5.0, and Ansys AQWA 2021 R2, extensive evaluations are conducted on the structural strength, stability, and dynamic response of both the T-type and the newly proposed Y-type platforms. In this research, the structural optimization algorithm based on the above simulation tools is adopted, and its results are compared with preoptimization results to demonstrate the improvements made in design precision and reliability. Results indicate that the Y-type model achieves a maximum reduction in von Mises stress by 30.21 MPa compared to the T-type model, and its heave and pitch motion amplitudes are reduced by 4.3412 m and 4.9362°, respectively, under extreme sea state conditions. Through structural optimization using the Nastran SOL200 module, the column structure weight is reduced by 11.31%, meeting the strength requirements while enhancing efficiency. These findings highlight the Y-type platform’s improved performance and provide robust design strategies for floating offshore wind turbines in deep-water regions, crucial for advancing global renewable energy solutions. Future research should focus on the impacts of different marine conditions on platform performance and consider integrating new materials or innovative design enhancements to further optimize platform functionality. Additionally, due to potential limitations from model simplification, emphasis on real-world testing and validation under operational conditions is recommended. Overall, this research clarifies the differences in structural performance between the T-type and Y-type floating platforms and introduces an improved platform design approach, offering valuable insights and guidance for the future development of floating offshore wind turbine technology.

Suggested Citation

  • Hao Yu Dou & Han Koo Jeong & Jian Lun Jiang, 2024. "Study on the Influence of an Internal Stiffening System on the Structural Strength of the Semi-Submersible Structures for a Floating Offshore Wind Turbine," Energies, MDPI, vol. 17(24), pages 1-19, December.
  • Handle: RePEc:gam:jeners:v:17:y:2024:i:24:p:6471-:d:1550245
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/24/6471/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/17/24/6471/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Kyeonguk Heo & Hongbae Park & Rae-Hyoung Yuck & Daeyong Lee, 2023. "Numerical Investigation of a Floating-Type Support Structure (Tri-Star Floater) for 9.5 MW Wind Turbine Generators," Energies, MDPI, vol. 16(24), pages 1-22, December.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.

      Corrections

      All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:24:p:6471-:d:1550245. See general information about how to correct material in RePEc.

      If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

      If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

      If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

      For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

      Please note that corrections may take a couple of weeks to filter through the various RePEc services.

      IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.