Author
Listed:
- Athanasios Dimitriadis
(Laboratory of Environmental Fuels and Hydrocarbons—LEFH, Chemical Process & Energy Resources Institute—CPERI, Centre for Research and Technology Hellas—CERTH, 6 km Harilaou-Thermi, 57001 Thessaloniki, Greece)
- Loukia P. Chrysikou
(Laboratory of Environmental Fuels and Hydrocarbons—LEFH, Chemical Process & Energy Resources Institute—CPERI, Centre for Research and Technology Hellas—CERTH, 6 km Harilaou-Thermi, 57001 Thessaloniki, Greece)
- Stella Bezergianni
(Laboratory of Environmental Fuels and Hydrocarbons—LEFH, Chemical Process & Energy Resources Institute—CPERI, Centre for Research and Technology Hellas—CERTH, 6 km Harilaou-Thermi, 57001 Thessaloniki, Greece)
Abstract
The main goal of this research is the production of e-fuels in gasoline- and diesel-range hydrocarbons via the hydrocracking of wax from Fischer–Tropsch (FT-wax) synthesis. The hydrogen for the hydrocracking process originated from solar energy via water electrolysis, thus, the produced fuels were called e-fuels. The FT-wax was produced via the Fischer–Tropsch synthesis of syngas stream from the chemical looping gasification (CLG) of biogenic residues. For the hydrocracking tests, a continuous-operation TRL3 (Technology Readiness Level) pilot plant was utilized. At first, hydrocracking catalyst screening was performed for the upgrading of the FT-wax. Three hydrocracking catalysts were investigated (Ni-W, Ni-W zeolite-supported, and Ni-W Al 2 O 3 -supported catalyst) via various operating conditions to identify the optimal operating window for each one. These three catalysts were selected, as they are typical catalysts that are used in the petroleum refinery industry. The optimal catalyst was found to be the NiW catalyst, as it led to high e-fuel yields (38 wt% e-gasoline and 47 wt% e-diesel) with an average hydrogen consumption. The optimum operating window was found at a 603 K reactor temperature, 8.3 MPa system pressure, 1 hr −1 LHSV, and 2500 scfb H 2 /oil ratio. In the next phase, the production of 5 L of hydrocracked wax was performed utilizing the optimum NiW catalyst and the optimal operating parameters. The liquid product was further fractionated to separate the fractions of e-gasoline, e-diesel, and e-heavy fuel. The e-gasoline and e-diesel fractions were qualitatively assessed, indicating that they fulfilled almost all EN 228 and EN 590 for petroleum-based gasoline and diesel, respectively. Furthermore, a 12-month storage study showed that the product can be stored for a period of 4 months in ambient conditions. In general, green transportation e-fuels with favorable properties that met most of the fossil fuels specifications were produced successfully from the hydrocracking of FT-wax.
Suggested Citation
Athanasios Dimitriadis & Loukia P. Chrysikou & Stella Bezergianni, 2024.
"Automotive e-Fuels via Hydrocracking of FT-Wax: e-Gasoline and e-Diesel Production,"
Energies, MDPI, vol. 17(11), pages 1-18, June.
Handle:
RePEc:gam:jeners:v:17:y:2024:i:11:p:2756-:d:1408981
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:11:p:2756-:d:1408981. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.