IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i5p2440-d1087317.html
   My bibliography  Save this article

Microscopic Study of Shale Anisotropy with SEM In Situ Compression and Three-Point Bending Experiments

Author

Listed:
  • Weibo Sui

    (College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China)

  • Yulong Wang

    (Petroleum Engineering Research Institute of Dagang Oilfield Company, Tianjin 300280, China)

  • Junwei Li

    (College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China)

Abstract

The microscopic anisotropy of shale has an important impact on its mechanical properties and crack behavior, so it is essential to understand the microscopic origin of anisotropic growth with a more effective laboratory work scheme. Uniaxial compression test and three-point bending test are considered to be efficient means to study the elastic properties and crack behavior of rocks. In this paper, uniaxial compression experiments and three-point bending experiments were conducted on shale outcrops in the Changqing area using field emission scanning electron microscopy (SEM) and in situ tensile testing, and the microscopic deformation and crack processes were quantitatively characterized by the digital image correlation (DIC) method. For the compression experiments, the observation of the first principal strain fields indicated that the microscopic anisotropy of shale was related to the bedding planes, and the microscopic deformations were mainly concentrated in the clay mineral accumulation area and at the microcracks. Elastic moduli and compressive strengths of specimens with different bedding angles were affected by the strong shear stress effects. The specimens with a bedding angle of 30° showed lower peak loads and compressive strengths, and the specimens with a bedding angle of 60° had lower elastic moduli. Three-point bending experiments were conducted for studying the effects of crack-bedding orientation relationships on cracking processes, and four critical fracturing mechanical properties were calculated. The short transverse-type cases were prone to break and had a lower peak load, tensile strength, fracture toughness and elastic-bending modulus. The divider-type cases were more difficult to break, formed a more tortuous crack and had a higher tensile strength, fracture toughness and elastic-bending modulus. The arrester-type cases had a middle range of mechanical parameters but developed the longest cracks. This study provides a feasible experimental and analysis method for understanding the microscopic anisotropy of shale samples. The small specimen size also makes the requirements of core samples easier to be satisfied considering the field application. Furthermore, the anisotropy of cracking processes can be understood better by building the connections between microstructural characteristics and mechanical performances.

Suggested Citation

  • Weibo Sui & Yulong Wang & Junwei Li, 2023. "Microscopic Study of Shale Anisotropy with SEM In Situ Compression and Three-Point Bending Experiments," Energies, MDPI, vol. 16(5), pages 1-15, March.
  • Handle: RePEc:gam:jeners:v:16:y:2023:i:5:p:2440-:d:1087317
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/5/2440/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/16/5/2440/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:5:p:2440-:d:1087317. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.