IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i21p7333-d1270095.html
   My bibliography  Save this article

Effect of Geochemical Reactivity on ScCO 2 –Brine–Rock Capillary Displacement: Implications for Carbon Geostorage

Author

Listed:
  • Felipe Cruz

    (Mewbourne School of Petroleum and Geological Engineering, University of Oklahoma, Norman, OK 73019-1003, USA)

  • Son Dang

    (Mewbourne School of Petroleum and Geological Engineering, University of Oklahoma, Norman, OK 73019-1003, USA)

  • Mark Curtis

    (Mewbourne School of Petroleum and Geological Engineering, University of Oklahoma, Norman, OK 73019-1003, USA)

  • Chandra Rai

    (Mewbourne School of Petroleum and Geological Engineering, University of Oklahoma, Norman, OK 73019-1003, USA)

Abstract

The displacement efficiency of supercritical CO 2 (scCO 2 ) injection in the storage zone and its primary trapping mechanism in the confining zone are strongly tied to the capillary phenomenon. Previous studies have indicated that the capillary phenomenon can be affected by geochemical reactivity induced by scCO 2 dissolution in formation brine. To quantify such changes, thin disk samples representing a sandstone storage reservoir, siltstone confining zone, and mudstone confining zone were treated under a scCO 2 -enriched brine static condition for 21 days at 65 °C and 20.7 MPa. Geochemical alterations were assessed at the surface level using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy and X-ray fluorescence. Before and after treatment, the wettability of the scCO 2 –brine–rock systems was determined using the captive-bubble method at fluid-equilibrated conditions. Pore size distributions of the bulk rocks were obtained with mercury injection capillary pressure, nuclear magnetic resonance, and isothermal nitrogen adsorption. The results indicate the dissolution of calcite at the surface, while other potentially reactive minerals (e.g., clays, feldspars, and dolomite) remain preserved. Despite alteration of the surface mineralogy, the measured contact angles in the scCO 2 –brine–rocks systems do not change significantly. Contact angle values of 42 ± 2° for sandstone and 36 ± 2° for clay-rich siltstone/calcite-rich mudstone were determined before and after treatment. The rocks studied here maintained their water-wettability at elevated conditions and after geochemical reactivity. It is also observed that surface alteration by geochemical effects did not impact the pore size distributions or porosities of the thin disk samples after treatment. These results provide insights into understanding the impact of short-term geochemical reactions on the scCO 2 –brine capillary displacement in the storage zone and the risks associated with scCO 2 breakthrough in confining zones.

Suggested Citation

  • Felipe Cruz & Son Dang & Mark Curtis & Chandra Rai, 2023. "Effect of Geochemical Reactivity on ScCO 2 –Brine–Rock Capillary Displacement: Implications for Carbon Geostorage," Energies, MDPI, vol. 16(21), pages 1-17, October.
  • Handle: RePEc:gam:jeners:v:16:y:2023:i:21:p:7333-:d:1270095
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/21/7333/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/16/21/7333/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:21:p:7333-:d:1270095. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.