IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i16p6071-d894170.html
   My bibliography  Save this article

Effects of Curing Pressure on the Long-Term Strength Retrogression of Oil Well Cement Cured under 200 °C

Author

Listed:
  • Hongtao Liu

    (Oil and Gas Engineering Research Institute, PetroChina Tarim Oilfield Company, Korla 841000, China)

  • Jiankun Qin

    (School of Petroleum Engineering, China University of Petroleum (East China), Qingdao 266580, China)

  • Bo Zhou

    (Oil and Gas Engineering Research Institute, PetroChina Tarim Oilfield Company, Korla 841000, China)

  • Zhongfei Liu

    (Oil and Gas Engineering Research Institute, PetroChina Tarim Oilfield Company, Korla 841000, China)

  • Zhongtao Yuan

    (Oil and Gas Engineering Research Institute, PetroChina Tarim Oilfield Company, Korla 841000, China)

  • Zhi Zhang

    (Oil and Gas Engineering Research Institute, PetroChina Tarim Oilfield Company, Korla 841000, China)

  • Zhengqing Ai

    (Oil and Gas Engineering Research Institute, PetroChina Tarim Oilfield Company, Korla 841000, China)

  • Xueyu Pang

    (School of Petroleum Engineering, China University of Petroleum (East China), Qingdao 266580, China
    Key Laboratory of Unconventional Oil & Gas Development, China University of Petroleum (East China), Ministry of Education, Qingdao 266580, China)

  • Xiaolin Liu

    (Supervision Center, PetroChina Tarim Oilfield Company, Korla 841000, China)

Abstract

The influences of curing pressure on the physical and mechanical property development of oil well cement during long-term curing were studied. Five silica-enriched cement slurries designed without and with reinforcement materials (latex fiber and nano-graphene) were autoclaved at 200 °C under two different pressures. The low pressure (50 MPa) curing was conducted for 2, 60, 90 and 180 days; the high pressure (150 MPa) curing was conducted for 2 and 360 days. The physical and mechanical properties of set cement were characterized by compressive strength, Young’s modulus, and water/gas permeability; the mineral composition and microstructure were determined by X-ray diffraction, mercury intrusion porosimetry, thermogravimetry and scanning electron microscope. Test results showed that high pressure (150 MPa) curing led to a more compact microstructure, which reduced the rate of strength retrogression in the long term. Samples with reinforcement materials, especially the latex fiber, showed higher compressive strength, Young’s modulus and lower permeability during long-term curing at both pressures.

Suggested Citation

  • Hongtao Liu & Jiankun Qin & Bo Zhou & Zhongfei Liu & Zhongtao Yuan & Zhi Zhang & Zhengqing Ai & Xueyu Pang & Xiaolin Liu, 2022. "Effects of Curing Pressure on the Long-Term Strength Retrogression of Oil Well Cement Cured under 200 °C," Energies, MDPI, vol. 15(16), pages 1-19, August.
  • Handle: RePEc:gam:jeners:v:15:y:2022:i:16:p:6071-:d:894170
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/16/6071/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/15/16/6071/
    Download Restriction: no
    ---><---

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ben Qi & Jiawen Fu & Jinfei Sun & Zaoyuan Li & Xin Yang & Fujie Yang & Xuning Wu, 2023. "Numerical Simulation on the Safety and Quality of Cementing by Using Pad Fluid in Horizontal Wells," Energies, MDPI, vol. 16(9), pages 1-15, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:16:p:6071-:d:894170. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.