IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i9p2346-d355427.html
   My bibliography  Save this article

Experimental Studies of Immiscible High-Nitrogen Natural Gas WAG Injection Efficiency in Mixed-Wet Carbonate Reservoir

Author

Listed:
  • Mirosław Wojnicki

    (Oil and Gas Institute–National Research Institute, 31-503 Cracow, Poland)

  • Jan Lubaś

    (Oil and Gas Institute–National Research Institute, 31-503 Cracow, Poland)

  • Marcin Warnecki

    (Oil and Gas Institute–National Research Institute, 31-503 Cracow, Poland)

  • Jerzy Kuśnierczyk

    (Oil and Gas Institute–National Research Institute, 31-503 Cracow, Poland)

  • Sławomir Szuflita

    (Oil and Gas Institute–National Research Institute, 31-503 Cracow, Poland)

Abstract

Crucial oil reservoirs are located in naturally fractured carbonate formations and are currently reaching a mature phase of production. Hence, a cost-effective enhanced oil recovery (EOR) method is needed to achieve a satisfactory recovery factor. The paper focuses on an experimental investigation of the efficiency of water alternating sour and high-nitrogen (~85% N 2 ) natural gas injection (WAG) in mixed-wetted carbonates that are crucial reservoir rocks for Polish oil fields. The foam-assisted water alternating gas method (FAWAG) was also tested. Both were compared with continuous water injection (CWI) and continuous gas injection (CGI). A series of coreflooding experiments were conducted within reservoir conditions (T = 126 ℃, P = 270 bar) on composite cores, and each consisted of four reservoir dolomite core plugs and was saturated with the original reservoir fluids. In turn, some of the experiments were conducted on artificially fractured cores to evaluate the impact of fractures on recovery efficiency. The performance evaluation of the tested methods was carried out by comparing oil recoveries from non-fractured composite cores, as well as fractured. In the case of non-fractured cores, the WAG injection outperformed continuous gas injection (CGI) and continuous water injection (CWI). As expected, the presence of fractures significantly reduced performance of WAG, CGI and CWI injection modes. In contrast, with regard to FAWAG, deployment of foam flow in the presence of fractures remarkably enhanced oil recovery, which confirms the possibility of using the FAWAG method in situations of premature gas breakthrough. The positive results encourage us to continue the research of the potential uses of this high-nitrogen natural gas in EOR, especially in the view of the utilization of gas reservoirs with advantageous location, high reserves and reservoir energy.

Suggested Citation

  • Mirosław Wojnicki & Jan Lubaś & Marcin Warnecki & Jerzy Kuśnierczyk & Sławomir Szuflita, 2020. "Experimental Studies of Immiscible High-Nitrogen Natural Gas WAG Injection Efficiency in Mixed-Wet Carbonate Reservoir," Energies, MDPI, vol. 13(9), pages 1-14, May.
  • Handle: RePEc:gam:jeners:v:13:y:2020:i:9:p:2346-:d:355427
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/9/2346/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/13/9/2346/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:9:p:2346-:d:355427. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.