IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i7p1797-d342940.html
   My bibliography  Save this article

Study on the Tri-axial Time-Dependent Deformation and Constitutive Model of Glauberite Salt Rock under the Coupled Effects of Compression and Dissolution

Author

Listed:
  • Mengtao Cao

    (College of Mining Engineering, Taiyuan University of Technology, Taiyuan 030000, China
    Key Laboratory of In-Situ Modified Mining of Ministry of Education, Taiyuan University of Technology, Taiyuan 030000, China)

  • Shunde Yin

    (Department of Civil and Environmental Engineering, University of Waterloo, Waterloo, ON 50701, Canada)

Abstract

Solution mining for glauberite salt rock is a long-term process that takes several years to several decades. Therefore, deposit deformations and subsidence of ground surfaces are time-dependent deformation problems that should consider the effect of water dissolution. In order to investigate the time-dependent deformation characteristics of glauberite salt rock, tri-axial time-dependent deformation tests were conducted under the condition of 4 MPa confining pressure and 5 MPa axial pressure with infiltration pressures of 3, 2, 1, and 0 MPa, respectively, and the micro-CT scan system was used to scan the glauberite specimens before and after the experiment in order to study the fracture evolution inside the specimen, and a damage constitutive model was established to fit the time-dependent deformation curves based on the damage mechanics and effective stress principle. To simulate the solution mining process, the time-dependent deformation process of glauberite salt rock was divided into three stages: hydraulic connection stage, water-saturated stage, and drainage stage. The results demonstrate that the hydraulic connection time for glauberite salt rock decreases with increasing infiltration pressure. The time-dependent deformations of the specimens at the hydraulic connection and saturated-water stages are significantly affected by the effective stress and continual mineral dissolution. At the drainage stage, the softening degree of the solid skeleton mechanical properties, which is caused by the dissolution effect and infiltration pressure loading history, decides the deformation of glauberite salt rock. In addition, the degree of softening inside glauberite salt rock caused by dissolution becomes more severe with increasing infiltration pressure using the micro-CT scan technology. Lastly, the time-dependent damage constitutive model is able to describe the tri-axial time-dependent deformation behavior of glauberite salt rock, and the variations of time-dependent deformation parameters further indicate the damage evolution of the solid skeleton mechanical properties of glauberite caused by infiltration pressure and dissolution effect.

Suggested Citation

  • Mengtao Cao & Shunde Yin, 2020. "Study on the Tri-axial Time-Dependent Deformation and Constitutive Model of Glauberite Salt Rock under the Coupled Effects of Compression and Dissolution," Energies, MDPI, vol. 13(7), pages 1-20, April.
  • Handle: RePEc:gam:jeners:v:13:y:2020:i:7:p:1797-:d:342940
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/7/1797/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/13/7/1797/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:7:p:1797-:d:342940. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.