IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i15p3010-d254728.html
   My bibliography  Save this article

Distribution of the Strip Tensions with Slip Control in Strip Processing Lines

Author

Listed:
  • Daniel Magura

    (BSH Michalovce, Továrenská 1635/2, 071 01 Michalovce, Slovakia)

  • Karol Kyslan

    (Department of Electrical Engineering and Mechatronics, Technical University of Košice, Letná 9, 042 00 Košice, Slovakia)

  • Sanjeevikumar Padmanaban

    (Department of Energy Technology, Aalborg University, 6700 Esbjerg, Denmark)

  • Viliam Fedák

    (Department of Electrical Engineering and Mechatronics, Technical University of Košice, Letná 9, 042 00 Košice, Slovakia)

Abstract

The control of tension in processing lines for metal strips tackles several problems. The process of achieving high tension driven by a multi-motor drive system, where the motors are mechanically coupled by a strip, is affected by the maximal torque of each drive, by friction between the strip and the surface of the tension roll, and by the wrap angle. The friction itself and the wrap angle are described by the e µα factor, which can be also calculated as the ratio of tensions in the strip in the previous section and subsequent section of the multi-motor drive. In this paper, an algorithm for the proper distribution of tensions in the strip for a multi-motor drive system of a continuous processing line is revealed. The algorithm ensures the tension distribution among particular drives of the tension leveler while respecting the physical limits of the drives and also preserving the desired conditions of a constant ratio between the input and output tensions for all drives in the leveler. The algorithm also prevents overloading of the drives. Finally, the algorithm was implemented in a control system of a strip processing line, and the obtained results correspond with the simulations. This, in turn, confirms the correctness of the algorithm design.

Suggested Citation

  • Daniel Magura & Karol Kyslan & Sanjeevikumar Padmanaban & Viliam Fedák, 2019. "Distribution of the Strip Tensions with Slip Control in Strip Processing Lines," Energies, MDPI, vol. 12(15), pages 1-15, August.
  • Handle: RePEc:gam:jeners:v:12:y:2019:i:15:p:3010-:d:254728
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/15/3010/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/12/15/3010/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:15:p:3010-:d:254728. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.