Author
Listed:
- Zafer Utlu
(Faculty of Engineering and Natural Sciences, Istanbul Atlas University, 34403 Istanbul, Turkey)
- Büşra Selenay Önal
(Aircraft Maintenance and Repair, Faculty of Applied Sciences, Istanbul Gelisim University, 34410 Istanbul, Turkey)
Abstract
Hydrogen-based technologies are widely considered promising pathways for decarbonizing power generation and industrial energy systems; however, their overall sustainability depends strongly on both production routes and conversion efficiencies. This study presents a comparative energy and exergy analysis of hydrogen-based decarbonization pathways under a consistent 1 MW net electrical output boundary, including natural gas combustion (S0), grey hydrogen combustion (S1), grey hydrogen fuel cell (S2), green hydrogen combustion (S3), and green hydrogen fuel cell (S4) systems. The results indicate that combustion-based pathways (S0, S1, and S3) exhibit relatively low energy efficiencies of approximately 30–40% and exergy efficiencies of 25–40%, accompanied by high exergy destruction levels generally exceeding 60%. In contrast, fuel cell-based configurations (S2 and S4) demonstrate improved conversion-stage thermodynamic performance, achieving energy efficiencies of 50–60% and exergy efficiencies of 45–65%, while reducing exergy destruction due to electrochemical conversion and lower irreversibilities. A detailed comparison shows that the natural gas reference system reaches an exergy efficiency of 33.7%, whereas the hydrogen fuel cell system achieves 46.5%, corresponding to approximately 42% lower exergy destruction and about 36% reduced fuel input. From an environmental perspective, the simplified carbon assessment indicates that natural gas combustion generates approximately 577 kg CO 2 /h. Grey hydrogen pathways remain associated with substantial upstream emissions, generating approximately 857 kg CO 2 /h for grey hydrogen combustion and 545 kg CO 2 /h for grey hydrogen fuel cell operation under the 1 MW net electrical output basis. In contrast, green hydrogen-based pathways are assumed to have near-zero direct/upstream operational CO 2 emissions under renewable-powered production assumptions. Overall, the findings show that hydrogen use alone does not guarantee decarbonization; rather, both the hydrogen production route and the final conversion technology must be considered to achieve thermodynamically efficient and low-carbon power generation.
Suggested Citation
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jcltec:v:8:y:2026:i:4:p:118-:d:2004790. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager The email address of this maintainer does not seem to be valid anymore. Please ask MDPI Indexing Manager to update the entry or send us the correct address
(email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.