IDEAS home Printed from https://ideas.repec.org/a/epw/ejeng0/v6y2021i2id62347.html

Performance Analysis of a Dual-Fuel Sugar Based Solid Rocket Propellant

Author

Listed:
  • Gbadebo Omoniyi Adeniyi

    (Centre for Space Transport and Propulsion, Nigeria)

  • Inkechukwu Nkere

    (Centre for Space Transport and Propulsion, Nigeria)

  • Lanre Moshood Adetoro

    (Centre for Space Transport and Propulsion, Nigeria)

  • Olusegun Samuel Sholiyi

    (Centre for Space Transport and Propulsion, Nigeria)

Abstract

The effects of dual-fuel on improving the ballistic efficiency of a low energy sugar-based solid rocket propellant were investigated in this paper. This was achieved by establishing a threshold proportion of sucrose to sorbitol that provided the highest ballistic efficiency, using a beam load cell (model single-point 2,000 kg linearly defined by 0-20 kN force, with ±.005 percent precision). Seven different propellant formulations were prepared, loaded into the rocket motor and tested for performance. The major performance parameters of interest were the thrust, total impulse, burn time, delivered specific impulse, delivered characteristic velocity, and the chamber pressure. The formulations tested were potassium nitrate–sucrose propellant (65% KNO3 and 35% sucrose (C12H22O11)) (KNSU); potassium nitrate-sorbitol propellant (65% KNO3 and 35% sorbitol (C6H14O6)) (KNSB); modified potassium nitrate-sucrose propellant (65% KNO3, 32% sucrose (C12H22O11)), and 3% carbon (C) (MODKNSU); potassium nitrate-sucrose-sorbitol propellant (65% KNO3, 25% sucrose (C12H22O11)), and 10% sorbitol (C6H14O6) (KNERK); potassium nitrate-sucrose-sorbitol-carbon propellant (65% KNO3, 24% sucrose (C12H22O11), 10% sorbitol (C6H14O6), and 1% carbon (C)) (MODKNERK); and finally a propellant made from KNO3, sucrose (C12H22O11), sorbitol (C6H14O6), carbon (C) and iron II oxide(Fe2O3) combinations in 65, 30, 3, 1, 1% proportion respectively. The novel result obtained from these experiments was applied to boost the performance of a KNSB rocket propellant motor during a rocket launch experiment. Both static and dynamic rocket motor internal ballistic parameters were then compared. The measured delivered motor average thrust and the effective propellant burn times were recorded as: (164.15N, 3.97s); (102.95N, 6.53s); (65.66N, 9.38s); (79.09N, 3.77s); (243.98N, 3.77s) and (92.6N, 5.89s) respectively. The MODKNERK, was established to produce a most efficient motor and with the full delivery of its ballistic energy. It was also established, that the ballistic and rocket motor efficiency of a lower energy rocket motor can be improved by starting the ignition of such motor with fast burning dual-fuel rocket propellant (MODKNERK).

Suggested Citation

  • Gbadebo Omoniyi Adeniyi & Inkechukwu Nkere & Lanre Moshood Adetoro & Olusegun Samuel Sholiyi, 2021. "Performance Analysis of a Dual-Fuel Sugar Based Solid Rocket Propellant," European Journal of Engineering and Technology Research, European Open Science, vol. 6(2), pages 34-41, February.
  • Handle: RePEc:epw:ejeng0:v:6:y:2021:i:2:id:62347
    DOI: 10.24018/ejeng.2021.6.2.2347
    as

    Download full text from publisher

    File URL: https://eu-opensci.org/index.php/ejeng/article/view/62347
    File Function: Abstract page
    Download Restriction: no

    File URL: https://eu-opensci.org/index.php/ejeng/article/download/62347/12619
    File Function: Full text
    Download Restriction: no

    File URL: https://libkey.io/10.24018/ejeng.2021.6.2.2347?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:epw:ejeng0:v:6:y:2021:i:2:id:62347. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Support (email available below). General contact details of provider: https://eu-opensci.org/index.php/ejeng .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.