Estimation of Aquifer Protective Capacity, Soil Corrosivity and Dar-Zarrouk Parameters in Kaura Area of Kaduna State, Nigeria

This study presents an estimation of aquifer protective capacity, soil corrosivity and Dar-Zarrouk parameters for Kaura area of Kaduna State in northern Nigeria. Electrical resistivity sounding data and borehole pumping test data obtained from 20 locations within the LGA were obtained and used for this study. The geoelectric data exhibited curve types generally consisting of H, HA, KH or K-A-H types from which five-layer lithology were delineated across the entire study area. Well yield varies from 16 – 400 litres/min, pumping rate ranges from 16 to 140 l/min, drawdown varies from 1 – 22m, while specific capacity ranged from 1 – 95 litres/min. The aquifer protective capacity characterization was based on values of longitudinal unit conductance of the overburden, and 35% of the locations showed good protective capacity, while the remaining 65% exhibited moderate protective capacity. From the soil corrosivity evaluation, the upper soil layers were classified as moderately corrosive at one location, four locations were marked as slightly corrosive, while the remaining locations were found to be practically non-corrosive. Based on thicknesses and resistivities of the overburden layers, Dar-Zarrouk parameters were determined. The reflection coefficient ranged from 0.29 to 0.92, resistivity contrast occurred between 0.35 to 25.38, while the coefficient of anisotropy ranged from 0.70 to 3.84 with mean value of 1.57. Values above 1.0 are generally considered high and they occurred more toward the western part of the area than the middle and eastern parts. Both the longitudinal unit conductance map and coefficient of anisotropy map were generated for the area.