IDEAS home Printed from https://ideas.repec.org/a/epw/ejeng0/v2y2017i12id60568.html

Improvement The Mechanical Properties of Styrene Butadiene Rubber By Using Silica Fume

Author

Listed:
  • Ali Abed Salman

    (Materials Engineering Department, Collage of Engineering, Mustansiriyah University, Baghdad)

Abstract

Styrene butadiene rubber (SBR) is considered to be one of the greatest important polymeric materials used as a bond, so we discussed in this study to improve its properties .This study covers the effect of silica fume on mechanical properties of styrene butadiene rubber reinforced with silica fume. The composites were prepared with (1 to 3 wt. %) of silica fume particles .The results had indicated that the tensile strength and flexural strength are improved by (11.6% and 13.5%) respectively at 2 wt% and the hardness is improved by (9.3%) at 3wt%.

Suggested Citation

  • Ali Abed Salman, 2017. "Improvement The Mechanical Properties of Styrene Butadiene Rubber By Using Silica Fume," European Journal of Engineering and Technology Research, European Open Science, vol. 2(12), pages 31-33, December.
    • Handle: RePEc:epw:ejeng0:v:2:y:2017:i:12:id:60568
    DOI: 10.24018/ejeng.2017.2.12.568
    as

    Download full text from publisher

    File URL: https://eu-opensci.org/index.php/ejeng/article/view/60568
    File Function: Abstract page
    Download Restriction: no
    File URL: https://eu-opensci.org/index.php/ejeng/article/download/60568/11827
    File Function: Full text
    Download Restriction: no
    File URL: https://libkey.io/10.24018/ejeng.2017.2.12.568?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    More about this item

    Keywords

    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:epw:ejeng0:v:2:y:2017:i:12:id:60568. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Support (email available below). General contact details of provider: https://eu-opensci.org/index.php/ejeng .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.