IDEAS home Printed from https://ideas.repec.org/a/alk/bjmss0/v3y2025i2id12963.html

Hybrid Additive and Subtractive Manufacturing Framework for High-Precision Mechanical Component Production

Author

Listed:
  • Margaret P. Jones

    (Department of Mechanical Engineering, Kate Gleason College of Engineering, Rochester Institute of Technology, 77 Lomb Memorial Drive, Rochester, NY 14623, USA)

  • Matthew M. Garrett

    (Department of Mechanical Engineering, Kate Gleason College of Engineering, Rochester Institute of Technology, 77 Lomb Memorial Drive, Rochester, NY 14623, USA)

  • Milton D. Zepeda

    (Department of Mechanical Engineering, Kate Gleason College of Engineering, Rochester Institute of Technology, 77 Lomb Memorial Drive, Rochester, NY 14623, USA)

  • Sandra K. Hudson

    (Department of Mechanical Engineering, Kate Gleason College of Engineering, Rochester Institute of Technology, 77 Lomb Memorial Drive, Rochester, NY 14623, USA)

  • Rosella J. Martineau

    (Department of Mechanical Engineering, Kate Gleason College of Engineering, Rochester Institute of Technology, 77 Lomb Memorial Drive, Rochester, NY 14623, USA)

Abstract

Hybrid additive and subtractive manufacturing is increasingly being used to produce high-value metal components that require both geometric complexity and functional precision. Additive routes such as directed energy deposition and wire-arc additive manufacturing can create near-net-shape structures, internal passages, and material-efficient preforms, whereas subtractive machining remains necessary for datum recovery, tolerance closure, sealing surfaces, bores, and final roughness control. This manuscript revises and extends a hybrid manufacturing framework for high-precision mechanical component production by treating geometry partitioning, allowance allocation, deposition, in-situ metrology, semi-finish machining, finish machining, and final inspection as one coordinated process chain. The proposed method includes analytical expressions for part zoning, machining allowance, deposition time, material removal time, total route duration, dimensional error propagation, surface-finish improvement, material utilization, and multi-objective route selection. An illustrative Ti-6Al-4V precision housing case is used to demonstrate how staged hybrid processing can reduce dimensional deviation from 0.42 mm in the as-deposited state to approximately 0.025 mm after finishing, while improving roughness from Ra = 14.2 µm to Ra = 1.4 µm and maintaining a much lower buy-to-fly ratio than a billet-based subtractive route. The revised framework is positioned for aerospace, tooling, energy, repair, and high-performance mechanical applications where process planning, metrology feedback, and finish-machining strategy must be considered together rather than as isolated post-processing decisions.

Suggested Citation

  • Margaret P. Jones & Matthew M. Garrett & Milton D. Zepeda & Sandra K. Hudson & Rosella J. Martineau, 2025. "Hybrid Additive and Subtractive Manufacturing Framework for High-Precision Mechanical Component Production," British Journal of Multidisciplinary Studies, Al-Kindi Center for Research and Development, vol. 3(2), pages 87-101, December.
  • Handle: RePEc:alk:bjmss0:v:3:y:2025:i:2:id:12963
    DOI: 10.32996/bjmss.2025.3.2.7
    as

    Download full text from publisher

    File URL: https://al-kindipublisher.com/index.php/bjmss/article/view/12963
    File Function: Abstract page
    Download Restriction: no

    File URL: https://al-kindipublisher.com/index.php/bjmss/article/download/12963/11633
    File Function: Full text
    Download Restriction: no

    File URL: https://libkey.io/10.32996/bjmss.2025.3.2.7?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;
    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:alk:bjmss0:v:3:y:2025:i:2:id:12963. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Al-Kindi Center for Research and Development (email available below). General contact details of provider: https://al-kindipublisher.com/index.php/bjmss .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.