IDEAS home Printed from https://ideas.repec.org/a/spr/joinma/v34y2023i1d10.1007_s10845-022-02007-x.html
   My bibliography  Save this article

Utilizing additive manufacturing and mass customization under capacity constraints

Author

Listed:
  • Rachel Lacroix

    (Technology and Operations Management Chair)

  • Anna Timonina-Farkas

    (Technology and Operations Management Chair)

  • Ralf W. Seifert

    (Technology and Operations Management Chair
    IMD Business School)

Abstract

Additive manufacturing (AM), originally used for prototyping, is increasingly adopted for custom final part production across different industries. However, printing speed and production volume are two barriers for the adoption of AM for product customization at large scale. Nevertheless, manufacturers could aim to combine the benefits of AM for product customization with traditional mass customization (MC) technologies over the product life cycle (PLC). This approach is showcased in our paper as a manufacturing opportunity and is addressed via a non convex-concave optimization model that considers a monopolist manufacturer producing horizontally differentiated products at scale. To satisfy individual customer preferences under capacity considerations, the firm jointly decides on the inventory, production quantity, product variety, optimal technology-switching times (between AM and MC) and pricing strategy. Our approach can be implemented by decision-makers to leverage customer-centricity and benefit from this novel hybrid manufacturing practice. By deriving a closed-form solution for the production quantity based on an adaptive inventory policy, the resulting optimization problem is solved using the Sample Average Approximation framework grounded by analytical results. Our results demonstrate that the new usage of AM with MC can benefit a manufacturer for customer-centric driven strategies. Significant profit improvements can be achieved with an AM–MC–AM technology-switching scenario under certain capacity conditions and with an increasing-decreasing pricing strategy. Our results also indicate that the benefits of pricing flexibility are highest when capacity is unlimited or when the firm does not hold inventory. Under capacity constraints, a simple decreasing pricing policy combined with inventory performs very well.

Suggested Citation

  • Rachel Lacroix & Anna Timonina-Farkas & Ralf W. Seifert, 2023. "Utilizing additive manufacturing and mass customization under capacity constraints," Journal of Intelligent Manufacturing, Springer, vol. 34(1), pages 281-301, January.
    • Handle: RePEc:spr:joinma:v:34:y:2023:i:1:d:10.1007_s10845-022-02007-x
    DOI: 10.1007/s10845-022-02007-x
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10845-022-02007-x
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s10845-022-02007-x?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jing-Sheng Song & Yue Zhang, 2020. "Stock or Print? Impact of 3-D Printing on Spare Parts Logistics," Management Science, INFORMS, vol. 66(9), pages 3860-3878, September.
    2. Arbabian, Mohammad E. & Wagner, Michael R., 2020. "The impact of 3D printing on manufacturer–retailer supply chains," European Journal of Operational Research, Elsevier, vol. 285(2), pages 538-552.
    3. Sunil Kumar & Jayashankar M. Swaminathan, 2003. "Diffusion of Innovations Under Supply Constraints," Operations Research, INFORMS, vol. 51(6), pages 866-879, December.
    4. Rabik Ar Chatterjee & Jehoshua Eliashberg, 1990. "The Innovation Diffusion Process in a Heterogeneous Population: A Micromodeling Approach," Management Science, INFORMS, vol. 36(9), pages 1057-1079, September.
    5. James T. Treharne & Charles R. Sox, 2002. "Adaptive Inventory Control for Nonstationary Demand and Partial Information," Management Science, INFORMS, vol. 48(5), pages 607-624, May.
    6. Abbas A. Kurawarwala & Hirofumi Matsuo, 1996. "Forecasting and Inventory Management of Short Life-Cycle Products," Operations Research, INFORMS, vol. 44(1), pages 131-150, February.
    7. Teck-Hua Ho & Sergei Savin & Christian Terwiesch, 2002. "Managing Demand and Sales Dynamics in New Product Diffusion Under Supply Constraint," Management Science, INFORMS, vol. 48(2), pages 187-206, February.
    8. Stephen C. Graves, 1999. "Addendum to "A Single-Item Inventory Model for a Nonstationary Demand Process"," Manufacturing & Service Operations Management, INFORMS, vol. 1(2), pages 174-174.
    9. Lacroix, Rachel & Seifert, Ralf W. & Timonina-Farkas, Anna, 2021. "Benefiting from additive manufacturing for mass customization across the product life cycle," Operations Research Perspectives, Elsevier, vol. 8(C).
    10. G. Hadley & T. M. Whitin, 1961. "An Optimal Final Inventory Model," Management Science, INFORMS, vol. 7(2), pages 179-183, January.
    11. Timonina-Farkas, Anna & Katsifou, Argyro & Seifert, Ralf W., 2020. "Product assortment and space allocation strategies to attract loyal and non-loyal customers," European Journal of Operational Research, Elsevier, vol. 285(3), pages 1058-1076.
    12. Kelvin Lancaster, 1990. "The Economics of Product Variety: A Survey," Marketing Science, INFORMS, vol. 9(3), pages 189-206.
    13. Berman, Barry, 2012. "3-D printing: The new industrial revolution," Business Horizons, Elsevier, vol. 55(2), pages 155-162.
    14. Ayd{i}n Alptekinou{g}lu & Charles J. Corbett, 2008. "Mass Customization vs. Mass Production: Variety and Price Competition," Manufacturing & Service Operations Management, INFORMS, vol. 10(2), pages 204-217, August.
    15. Frank M. Bass, 1969. "A New Product Growth for Model Consumer Durables," Management Science, INFORMS, vol. 15(5), pages 215-227, January.
    16. Westerweel, Bram & Basten, Rob J.I. & van Houtum, Geert-Jan, 2018. "Traditional or Additive Manufacturing? Assessing Component Design Options through Lifecycle Cost Analysis," European Journal of Operational Research, Elsevier, vol. 270(2), pages 570-585.
    17. Stephen C. Graves, 1999. "A Single-Item Inventory Model for a Nonstationary Demand Process," Manufacturing & Service Operations Management, INFORMS, vol. 1(1), pages 50-61.
    18. Baumers, Martin & Dickens, Phill & Tuck, Chris & Hague, Richard, 2016. "The cost of additive manufacturing: machine productivity, economies of scale and technology-push," Technological Forecasting and Social Change, Elsevier, vol. 102(C), pages 193-201.
    19. Weller, Christian & Kleer, Robin & Piller, Frank T., 2015. "Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited," International Journal of Production Economics, Elsevier, vol. 164(C), pages 43-56.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lacroix, Rachel & Seifert, Ralf W. & Timonina-Farkas, Anna, 2021. "Benefiting from additive manufacturing for mass customization across the product life cycle," Operations Research Perspectives, Elsevier, vol. 8(C).
    2. Guo, Shu & Choi, Tsan-Ming & Chung, Sai-Ho, 2022. "Self-design fun: Should 3D printing be employed in mass customization operations?," European Journal of Operational Research, Elsevier, vol. 299(3), pages 883-897.
    3. Bin Hu & Zhankun Sun, 2022. "Managing Self-Replicating Innovative Goods," Management Science, INFORMS, vol. 68(1), pages 399-419, January.
    4. Li Chen & Yao Cui & Hau L. Lee, 2021. "Retailing with 3D Printing," Production and Operations Management, Production and Operations Management Society, vol. 30(7), pages 1986-2007, July.
    5. Ivan Diaz-Rainey & Dionisia Tzavara, 2011. "Financing Renewable Energy through Household Adoption of Green Electricity Tariffs: A Diffusion Model of an Induced Environmental Market," Working Paper series, University of East Anglia, Centre for Competition Policy (CCP) 2011-03, Centre for Competition Policy, University of East Anglia, Norwich, UK..
    6. Yang, Liu & Li, Haitao & Campbell, James F. & Sweeney, Donald C., 2017. "Integrated multi-period dynamic inventory classification and control," International Journal of Production Economics, Elsevier, vol. 189(C), pages 86-96.
    7. Nie, Jiajia & Xu, Xiaoxuan & Yue, Xiaohang & Guo, Qiang & Zhou, Yu, 2023. "Less is more: A strategic analysis of 3D printing with limited capacity," International Journal of Production Economics, Elsevier, vol. 258(C).
    8. Zhiling Guo & Jianqing Chen, 2018. "Multigeneration Product Diffusion in the Presence of Strategic Consumers," Information Systems Research, INFORMS, vol. 29(1), pages 206-224, March.
    9. Meade, Nigel & Islam, Towhidul, 2006. "Modelling and forecasting the diffusion of innovation - A 25-year review," International Journal of Forecasting, Elsevier, vol. 22(3), pages 519-545.
    10. Harshad Sonar & Vivek Khanzode & Milind Akarte, 2022. "Additive Manufacturing Enabled Supply Chain Management: A Review and Research Directions," Vision, , vol. 26(2), pages 147-162, June.
    11. Shun-Chen Niu, 2006. "A Piecewise-Diffusion Model of New-Product Demands," Operations Research, INFORMS, vol. 54(4), pages 678-695, August.
    12. Kejia Hu & Jason Acimovic & Francisco Erize & Douglas J. Thomas & Jan A. Van Mieghem, 2019. "Forecasting New Product Life Cycle Curves: Practical Approach and Empirical Analysis," Service Science, INFORMS, vol. 21(1), pages 66-85, January.
    13. Yiwei Chen & Vivek F. Farias, 2013. "Simple Policies for Dynamic Pricing with Imperfect Forecasts," Operations Research, INFORMS, vol. 61(3), pages 612-624, June.
    14. Martin Baumers & Luca Beltrametti & Angelo Gasparre & Richard Hague, 2017. "Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation," International Journal of Production Research, Taylor & Francis Journals, vol. 55(23), pages 6957-6970, December.
    15. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    16. Xiang, Mengyuan & Rossi, Roberto & Martin-Barragan, Belen & Tarim, S. Armagan, 2023. "A mathematical programming-based solution method for the nonstationary inventory problem under correlated demand," European Journal of Operational Research, Elsevier, vol. 304(2), pages 515-524.
    17. Abedi, Vahideh Sadat, 2019. "Compartmental diffusion modeling: Describing customer heterogeneity & communication network to support decisions for new product introductions," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 536(C).
    18. Teck-Hua Ho & Shan Li & So-Eun Park & Zuo-Jun Max Shen, 2012. "Customer Influence Value and Purchase Acceleration in New Product Diffusion," Marketing Science, INFORMS, vol. 31(2), pages 236-256, March.
    19. Boxiao Chen, 2021. "Data‐Driven Inventory Control with Shifting Demand," Production and Operations Management, Production and Operations Management Society, vol. 30(5), pages 1365-1385, May.
    20. Kartik Hosanagar & Peng Han & Yong Tan, 2010. "Diffusion Models for Peer-to-Peer (P2P) Media Distribution: On the Impact of Decentralized, Constrained Supply," Information Systems Research, INFORMS, vol. 21(2), pages 271-287, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:joinma:v:34:y:2023:i:1:d:10.1007_s10845-022-02007-x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.