IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i4p2394-d753493.html
   My bibliography  Save this article

An Energy Performance Evaluation of Commercially Available Window Glazing in Darwin’s Tropical Climate

Author

Listed:
  • Hooman Mehdizadeh-Rad

    (College of Engineering, IT & Environment, Charles Darwin University, Darwin, NT 0810, Australia
    Energy and Resources Institute, Charles Darwin University, Ellengowan Dr., Brinkin, NT 0810, Australia)

  • Taimoor Ahmad Choudhry

    (College of Engineering, IT & Environment, Charles Darwin University, Darwin, NT 0810, Australia)

  • Anne W. M. Ng

    (College of Engineering, IT & Environment, Charles Darwin University, Darwin, NT 0810, Australia
    Energy and Resources Institute, Charles Darwin University, Ellengowan Dr., Brinkin, NT 0810, Australia)

  • Zohreh Rajabi

    (College of Engineering and Science, Victoria University, Melbourne, VIC 8001, Australia
    Institute for Sustainable Industries & Liveable Cities, Victoria University, P.O. Box 14428, Melbourne, VIC 8001, Australia)

  • Muhammad Farooq Rais

    (Cosmos Science Corporation, 5 Sagar Road, Lahore Cantt, Lahore 54810, Pakistan)

  • Asad Zia

    (School of Civil Engineering, Zhengzhou University, Zhengzhou 450001, China)

  • Muhammad Atiq Ur Rehman Tariq

    (College of Engineering and Science, Victoria University, Melbourne, VIC 8001, Australia
    Institute for Sustainable Industries & Liveable Cities, Victoria University, P.O. Box 14428, Melbourne, VIC 8001, Australia)

Abstract

A total of 40% of the world’s energy produced is utilized to maintain thermal comfort for the occupants of the building. Governments are taking measures collectively to regulate energy efficient buildings to reduce carbon emissions globally. Windows account for more than half of total energy losses in the buildings. The employment of energy efficient glazing in the construction industry is not common in Australia. This paper investigates several types of commercially available windows and their effectiveness in the hot and humid climate of Darwin. Although extensive literature is available for cold regions, these windows have not been studied in hot and humid climates such as the climate in Darwin. Building cooling loads of an academic building were calculated using Autodesk Revit Architecture and Carrier HAP. Double glazed variants offered approximately a 5% reduction in cooling loads and had a payback period of nearly 7 to 9 years, depending on the type of gas used to fill the pane cavity. The results indicate that triple glazed, or aerogel-based windows will provide about 11–12 % of energy saving in cooling loads. These can be a viable alternative and have a payback period of 11 years, while their average service life expectancy is 30 years. It was found that the feasibility of efficient glazing depends on market price, building usage, and energy efficiency of an overall building envelope.

Suggested Citation

  • Hooman Mehdizadeh-Rad & Taimoor Ahmad Choudhry & Anne W. M. Ng & Zohreh Rajabi & Muhammad Farooq Rais & Asad Zia & Muhammad Atiq Ur Rehman Tariq, 2022. "An Energy Performance Evaluation of Commercially Available Window Glazing in Darwin’s Tropical Climate," Sustainability, MDPI, vol. 14(4), pages 1-18, February.
    • Handle: RePEc:gam:jsusta:v:14:y:2022:i:4:p:2394-:d:753493
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/4/2394/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/14/4/2394/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Acosta, Ignacio & Munoz, Carmen & Campano, Miguel Angel & Navarro, Jaime, 2015. "Analysis of daylight factors and energy saving allowed by windows under overcast sky conditions," Renewable Energy, Elsevier, vol. 77(C), pages 194-207.
    2. Mamdooh Alwetaishi & Omrane Benjeddou, 2021. "Impact of Window to Wall Ratio on Energy Loads in Hot Regions: A Study of Building Energy Performance," Energies, MDPI, vol. 14(4), pages 1-15, February.
    3. Paulos, Jason & Berardi, Umberto, 2020. "Optimizing the thermal performance of window frames through aerogel-enhancements," Applied Energy, Elsevier, vol. 266(C).
    4. B. Mempouo & E. Cooper & S.B. Riffat, 2010. "Novel window technologies and the Code for Sustainable Homes in the UK," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 5(4), pages 167-174, March.
    5. Kyung-joo Cho & Dong-woo Cho, 2018. "Solar Heat Gain Coefficient Analysis of a Slim-Type Double Skin Window System: Using an Experimental and a Simulation Method," Energies, MDPI, vol. 11(1), pages 1-17, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Saman Abolghasemi Moghaddam & Catarina Serra & Manuel Gameiro da Silva & Nuno Simões, 2023. "Comprehensive Review and Analysis of Glazing Systems towards Nearly Zero-Energy Buildings: Energy Performance, Thermal Comfort, Cost-Effectiveness, and Environmental Impact Perspectives," Energies, MDPI, vol. 16(17), pages 1-30, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Santu Golder & Ramadas Narayanan & Md. Rashed Hossain & Mohammad Rofiqul Islam, 2021. "Experimental and CFD Investigation on the Application for Aerogel Insulation in Buildings," Energies, MDPI, vol. 14(11), pages 1-16, June.
    2. Sai Liu & Yang Li & Ying Wang & Yuwei Du & Kin Man Yu & Hin-Lap Yip & Alex K. Y. Jen & Baoling Huang & Chi Yan Tso, 2024. "Mask-inspired moisture-transmitting and durable thermochromic perovskite smart windows," Nature Communications, Nature, vol. 15(1), pages 1-11, December.
    3. Xianfeng Huang & Shangyou Wei & Shangyu Zhu, 2020. "Study on Daylighting Optimization in the Exhibition Halls of Museums for Chinese Calligraphy and Painting Works," Energies, MDPI, vol. 13(1), pages 1-15, January.
    4. Zhang, Xiang & Saelens, Dirk & Roels, Staf, 2022. "Estimating dynamic solar gains from on-site measured data: An ARX modelling approach," Applied Energy, Elsevier, vol. 321(C).
    5. Mohamed H. Elnabawi, 2021. "Evaluating the Impact of Energy Efficiency Building Codes for Residential Buildings in the GCC," Energies, MDPI, vol. 14(23), pages 1-22, December.
    6. Georgios E. Arnaoutakis & Dimitris A. Katsaprakakis, 2021. "Energy Performance of Buildings with Thermochromic Windows in Mediterranean Climates," Energies, MDPI, vol. 14(21), pages 1-14, October.
    7. Acosta, Ignacio & Campano, Miguel Ángel & Molina, Juan Francisco, 2016. "Window design in architecture: Analysis of energy savings for lighting and visual comfort in residential spaces," Applied Energy, Elsevier, vol. 168(C), pages 493-506.
    8. Mesloub, Abdelhakim & Ghosh, Aritra & Touahmia, Mabrouk & Albaqawy, Ghazy Abdullah & Alsolami, Badr M. & Ahriz, Atef, 2022. "Assessment of the overall energy performance of an SPD smart window in a hot desert climate," Energy, Elsevier, vol. 252(C).
    9. Shiva Najaf Khosravi & Ardeshir Mahdavi, 2021. "A CFD-Based Parametric Thermal Performance Analysis of Supply Air Ventilated Windows," Energies, MDPI, vol. 14(9), pages 1-20, April.
    10. In-Tae Kim & Yu-Sin Kim & Meeryoung Cho & Hyeonggon Nam & Anseop Choi & Taeyon Hwang, 2019. "High-Performance Accuracy of Daylight-Responsive Dimming Systems with Illuminance by Distant Luminaires for Energy-Saving Buildings," Energies, MDPI, vol. 12(4), pages 1-21, February.
    11. Ke, Yujie & Tan, Yutong & Feng, Chengchen & Chen, Cong & Lu, Qi & Xu, Qiyang & Wang, Tao & Liu, Hai & Liu, Xinghai & Peng, Jinqing & Long, Yi, 2022. "Tetra-Fish-Inspired aesthetic thermochromic windows toward Energy-Saving buildings," Applied Energy, Elsevier, vol. 315(C).
    12. Tao, Yao & Zhang, Haihua & Huang, Dongmei & Fan, Chuangang & Tu, Jiyuan & Shi, Long, 2021. "Ventilation performance of a naturally ventilated double skin façade with low-e glazing," Energy, Elsevier, vol. 229(C).
    13. Anatoliy M. Pavlenko & Karolina Sadko, 2023. "Evaluation of Numerical Methods for Predicting the Energy Performance of Windows," Energies, MDPI, vol. 16(3), pages 1-23, February.
    14. Singh, Ramkishore & Lazarus, I.J. & Kishore, V.V.N., 2015. "Effect of internal woven roller shade and glazing on the energy and daylighting performances of an office building in the cold climate of Shillong," Applied Energy, Elsevier, vol. 159(C), pages 317-333.
    15. Lou, Siwei & Li, Danny H.W. & Alshaibani, Khalid A. & Xing, Haowei & Li, Zhengrong & Huang, Yu & Xia, Dawei, 2022. "An all-sky luminance and radiance distribution model for built environment studies," Renewable Energy, Elsevier, vol. 190(C), pages 822-835.
    16. Das, Aparna & Paul, Saikat Kumar, 2015. "Artificial illumination during daytime in residential buildings: Factors, energy implications and future predictions," Applied Energy, Elsevier, vol. 158(C), pages 65-85.
    17. Zhiqiang Wang & Qi Tian & Jie Jia, 2022. "The Convective Heat Transfer Performance and Structural Optimization of the Cavity in Energy-Saving Thermal Insulation Windows under Cold Air Penetration Condition," Energies, MDPI, vol. 15(7), pages 1-21, March.
    18. Jiayu Li & Bohong Zheng & Komi Bernard Bedra & Zhe Li & Xiao Chen, 2021. "Evaluating the Effect of Window-to-Wall Ratios on Cooling-Energy Demand on a Typical Summer Day," IJERPH, MDPI, vol. 18(16), pages 1-13, August.
    19. Qiu, Yu & Zhang, Yuanting & Li, Qing & Xu, Yucong & Wen, Zhe-Xi, 2020. "A novel parabolic trough receiver enhanced by integrating a transparent aerogel and wing-like mirrors," Applied Energy, Elsevier, vol. 279(C).
    20. Karunathilake, Hirushie & Hewage, Kasun & Sadiq, Rehan, 2018. "Opportunities and challenges in energy demand reduction for Canadian residential sector: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2005-2016.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:4:p:2394-:d:753493. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.