IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i23p15591-d981954.html
   My bibliography  Save this article

Tilt Angle and Orientation Assessment of Photovoltaic Thermal (PVT) System for Sub-Saharan Tropical Regions: Case Study Douala, Cameroon

Author

Listed:
  • Aloys Martial Ekoe A Akata

    (Energy Systems Technology Laboratory (ESTL), University of Douala, Douala P.O. Box 24157, Cameroon
    Environmental Energy Technologies Laboratory (EETL), University of Yaoundé I, Yaoundé P.O. Box 812, Cameroon
    Department of Mechanical Engineering, Shri Govindram Seksaria Institute of Technology and Science, Indore 452 003, India)

  • Donatien Njomo

    (Environmental Energy Technologies Laboratory (EETL), University of Yaoundé I, Yaoundé P.O. Box 812, Cameroon)

  • Basant Agrawal

    (Department of Mechanical Engineering, Shri Govindram Seksaria Institute of Technology and Science, Indore 452 003, India)

  • Auguste Mackpayen

    (Department of Mechanical Engineering, University of Bangui, Bangui P.O. Box 1450, Central African Republic)

  • Abdel-Hamid Mahamat Ali

    (Higher National Petroleum Institute of Mao, N’Djamena 4377, Chad)

Abstract

Photovoltaic systems when integrated into a building structure can satisfy the world’s energy requirements at a competitive cost by providing onsite electrical and thermal energies for domestic appliances. The energy yield of the photovoltaic system is affected by the intensity of the solar radiation, wind speed, tilt angle, orientation, geographical location, etc. This paper presents an optimisation model of the tilt angle and orientation of a photovoltaic thermal system. A methodology has been developed to optimize the tilted angle of the roof for higher exergy output taking into account the intensity of solar radiation, wind speed, geographical location, cost of cleaning dust, etc. For a system installed in the city of Douala, Cameroon, it is recommended that the PV should be inclined at an angle between 10° and 20° south-facing for economical output. The cost per unit of electricity between the tilt inclination angles from 0° to 20° with south orientation is USD 0.04 per kWh. The cost of electricity loss due to a 20° tilt inclination angle can be compensated with the labour cost and work required for cleaning the photovoltaic thermal (PVT) system of the horizontal roof. The system installed over an effective area of 8 m 2 is capable of producing annual net exergy of 2195.81 kWh/year at an efficiency of 11.8%.

Suggested Citation

  • Aloys Martial Ekoe A Akata & Donatien Njomo & Basant Agrawal & Auguste Mackpayen & Abdel-Hamid Mahamat Ali, 2022. "Tilt Angle and Orientation Assessment of Photovoltaic Thermal (PVT) System for Sub-Saharan Tropical Regions: Case Study Douala, Cameroon," Sustainability, MDPI, vol. 14(23), pages 1-17, November.
    • Handle: RePEc:gam:jsusta:v:14:y:2022:i:23:p:15591-:d:981954
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/23/15591/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/14/23/15591/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Lubitz, William David, 2011. "Effect of manual tilt adjustments on incident irradiance on fixed and tracking solar panels," Applied Energy, Elsevier, vol. 88(5), pages 1710-1719, May.
    2. Friesenhan, Christian & Agirre, Ion & Eltrop, Ludger & Arias, Pedro L., 2017. "Streamlined life cycle analysis for assessing energy and exergy performance as well as impact on the climate for landfill gas utilization technologies," Applied Energy, Elsevier, vol. 185(P1), pages 805-813.
    3. Gholampour, Maysam & Ameri, Mehran, 2016. "Energy and exergy analyses of Photovoltaic/Thermal flat transpired collectors: Experimental and theoretical study," Applied Energy, Elsevier, vol. 164(C), pages 837-856.
    4. Haghdadi, Navid & Copper, Jessie & Bruce, Anna & MacGill, Iain, 2017. "A method to estimate the location and orientation of distributed photovoltaic systems from their generation output data," Renewable Energy, Elsevier, vol. 108(C), pages 390-400.
    5. Agrawal, Basant & Tiwari, G.N., 2010. "Optimizing the energy and exergy of building integrated photovoltaic thermal (BIPVT) systems under cold climatic conditions," Applied Energy, Elsevier, vol. 87(2), pages 417-426, February.
    6. Yildiz, Abdullah & Güngör, Ali, 2009. "Energy and exergy analyses of space heating in buildings," Applied Energy, Elsevier, vol. 86(10), pages 1939-1948, October.
    7. Lu, Hao & Lu, Lin & Wang, Yuanhao, 2016. "Numerical investigation of dust pollution on a solar photovoltaic (PV) system mounted on an isolated building," Applied Energy, Elsevier, vol. 180(C), pages 27-36.
    8. Hartner, Michael & Ortner, André & Hiesl, Albert & Haas, Reinhard, 2015. "East to west – The optimal tilt angle and orientation of photovoltaic panels from an electricity system perspective," Applied Energy, Elsevier, vol. 160(C), pages 94-107.
    9. Vats, Kanchan & Tiwari, G.N., 2012. "Energy and exergy analysis of a building integrated semitransparent photovoltaic thermal (BISPVT) system," Applied Energy, Elsevier, vol. 96(C), pages 409-416.
    10. Razmara, M. & Maasoumy, M. & Shahbakhti, M. & Robinett, R.D., 2015. "Optimal exergy control of building HVAC system," Applied Energy, Elsevier, vol. 156(C), pages 555-565.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bayrak, Fatih & Abu-Hamdeh, Nidal & Alnefaie, Khaled A. & Öztop, Hakan F., 2017. "A review on exergy analysis of solar electricity production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 755-770.
    2. Zhong, Qing & Tong, Daoqin, 2020. "Spatial layout optimization for solar photovoltaic (PV) panel installation," Renewable Energy, Elsevier, vol. 150(C), pages 1-11.
    3. Ulloa, Carlos & Nuñez, José M. & Lin, Chengxian & Rey, Guillermo, 2018. "AHP-based design method of a lightweight, portable and flexible air-based PV-T module for UAV shelter hangars," Renewable Energy, Elsevier, vol. 123(C), pages 767-780.
    4. Gaur, Ankita & Tiwari, G.N., 2014. "Performance of a-Si thin film PV modules with and without water flow: An experimental validation," Applied Energy, Elsevier, vol. 128(C), pages 184-191.
    5. Das, Dudul & Kalita, Pankaj & Roy, Omkar, 2018. "Flat plate hybrid photovoltaic- thermal (PV/T) system: A review on design and development," Renewable and Sustainable Energy Reviews, Elsevier, vol. 84(C), pages 111-130.
    6. Lukač, Niko & Žlaus, Danijel & Seme, Sebastijan & Žalik, Borut & Štumberger, Gorazd, 2013. "Rating of roofs’ surfaces regarding their solar potential and suitability for PV systems, based on LiDAR data," Applied Energy, Elsevier, vol. 102(C), pages 803-812.
    7. Kaddoura, Tarek O. & Ramli, Makbul A.M. & Al-Turki, Yusuf A., 2016. "On the estimation of the optimum tilt angle of PV panel in Saudi Arabia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 626-634.
    8. Du, Zhimin & Jin, Xinqiao & Fang, Xing & Fan, Bo, 2016. "A dual-benchmark based energy analysis method to evaluate control strategies for building HVAC systems," Applied Energy, Elsevier, vol. 183(C), pages 700-714.
    9. Hafez, A.Z. & Soliman, A. & El-Metwally, K.A. & Ismail, I.M., 2017. "Tilt and azimuth angles in solar energy applications – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 147-168.
    10. Gassar, Abdo Abdullah Ahmed & Cha, Seung Hyun, 2021. "Review of geographic information systems-based rooftop solar photovoltaic potential estimation approaches at urban scales," Applied Energy, Elsevier, vol. 291(C).
    11. Menberg, Kathrin & Heo, Yeonsook & Choi, Wonjun & Ooka, Ryozo & Choudhary, Ruchi & Shukuya, Masanori, 2017. "Exergy analysis of a hybrid ground-source heat pump system," Applied Energy, Elsevier, vol. 204(C), pages 31-46.
    12. Gaur, Ankita & Tiwari, G.N., 2015. "Analytical expressions for temperature dependent electrical efficiencies of thin film BIOPVT systems," Applied Energy, Elsevier, vol. 146(C), pages 442-452.
    13. Prek, Matjaž & Butala, Vincenc, 2017. "Comparison between Fanger's thermal comfort model and human exergy loss," Energy, Elsevier, vol. 138(C), pages 228-237.
    14. Jiang, Joe-Air & Su, Yu-Li & Shieh, Jyh-Cherng & Kuo, Kun-Chang & Lin, Tzu-Shiang & Lin, Ta-Te & Fang, Wei & Chou, Jui-Jen & Wang, Jen-Cheng, 2014. "On application of a new hybrid maximum power point tracking (MPPT) based photovoltaic system to the closed plant factory," Applied Energy, Elsevier, vol. 124(C), pages 309-324.
    15. Nazri, Nurul Syakirah & Fudholi, Ahmad & Mustafa, Wan & Yen, Chan Hoy & Mohammad, Masita & Ruslan, Mohd Hafidz & Sopian, Kamaruzzaman, 2019. "Exergy and improvement potential of hybrid photovoltaic thermal/thermoelectric (PVT/TE) air collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 132-144.
    16. Debbarma, Mary & Sudhakar, K. & Baredar, Prashant, 2017. "Thermal modeling, exergy analysis, performance of BIPV and BIPVT: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 1276-1288.
    17. Buonomano, Annamaria & Calise, Francesco & Palombo, Adolfo & Vicidomini, Maria, 2016. "BIPVT systems for residential applications: An energy and economic analysis for European climates," Applied Energy, Elsevier, vol. 184(C), pages 1411-1431.
    18. Ekoe A Akata, Aloys Martial & Njomo, Donatien & Agrawal, Basant, 2017. "Assessment of Building Integrated Photovoltaic (BIPV) for sustainable energy performance in tropical regions of Cameroon," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 1138-1152.
    19. Hu, Zhongting & He, Wei & Ji, Jie & Hu, Dengyun & Lv, Song & Chen, Hongbing & Shen, Zhihe, 2017. "Comparative study on the annual performance of three types of building integrated photovoltaic (BIPV) Trombe wall system," Applied Energy, Elsevier, vol. 194(C), pages 81-93.
    20. Yazdanifard, Farideh & Ameri, Mehran, 2018. "Exergetic advancement of photovoltaic/thermal systems (PV/T): A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 97(C), pages 529-553.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:23:p:15591-:d:981954. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.