IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v8y2015i2p1487-1504d45991.html
   My bibliography  Save this article

A Study on the Variation of Heating and Cooling Load According to the Use of Horizontal Shading and Venetian Blinds in Office Buildings in Korea

Author

Listed:
  • Seok-Hyun Kim

    (Department of Architectural Engineering, Graduate School of Yeungnam University, Gyeongsan 712-749, Korea)

  • Kyung-Ju Shin

    (Department of Architectural Engineering, Graduate School of Yeungnam University, Gyeongsan 712-749, Korea)

  • Bo-Eun Choi

    (Department of Architectural Engineering, Graduate School of Yeungnam University, Gyeongsan 712-749, Korea)

  • Jae-Hun Jo

    (Department of Architectural Engineering, Inha University, Incheon 151-402, Korea)

  • Soo Cho

    (Korea Institute of Energy Research, Daejeon 305-343, Korea)

  • Young-Hum Cho

    (School of Architecture, Yeungnam University, Gyeongsan 712-749, Korea)

Abstract

The construction industry has made considerable energy-saving efforts in buildings, and studies of energy-savings are ongoing. Shading is used to control the solar radiation transferred through windows. Many studies have examined the position and type of shading in different countries, but few have investigated the effects of shading installation in Korea. In this study, the case of the shading installation according to the standard of Korea, and variations of the heating and cooling load in the unit area on the performance of the windows were examined. This study compared the variations of the heating and cooling load in the case of horizontal shading and the changing position of venetian blinds. This study confirmed that horizontal shading longer than the standard length in Korea saved a maximum of 13% energy consumption. This study confirmed the point of change of energy consumption by the Solar Heat Gain Coefficient (SHGC) variations. The exterior venetian blinds and those between glazing were unaffected by the SHGC. On the other hand, in the case of a south façade, the interior venetian blinds resulted in 24% higher energy consumption than the installation of horizontal shading in case of Window to Wall Ratio (WWR): 80%, U-value: 2.1 and SHGC: 0.4.

Suggested Citation

  • Seok-Hyun Kim & Kyung-Ju Shin & Bo-Eun Choi & Jae-Hun Jo & Soo Cho & Young-Hum Cho, 2015. "A Study on the Variation of Heating and Cooling Load According to the Use of Horizontal Shading and Venetian Blinds in Office Buildings in Korea," Energies, MDPI, vol. 8(2), pages 1-18, February.
  • Handle: RePEc:gam:jeners:v:8:y:2015:i:2:p:1487-1504:d:45991
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/8/2/1487/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/8/2/1487/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Chi-Ming Lai & Yao-Hong Wang, 2011. "Energy-Saving Potential of Building Envelope Designs in Residential Houses in Taiwan," Energies, MDPI, vol. 4(11), pages 1-16, November.
    2. Yeo Beom Yoon & Woo Ram Jeong & Kwang Ho Lee, 2014. "Window Material Daylighting Performance Assessment Algorithm: Comparing Radiosity and Split-Flux Methods," Energies, MDPI, vol. 7(4), pages 1-15, April.
    3. Yeo Beom Yoon & Rashmi Manandhar & Kwang Ho Lee, 2014. "Comparative Study of Two Daylighting Analysis Methods with Regard to Window Orientation and Interior Wall Reflectance," Energies, MDPI, vol. 7(9), pages 1-22, September.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Simona Moretti & Alvaro Marucci, 2019. "A Photovoltaic Greenhouse with Passive Variation in Shading by Fixed Horizontal PV Panels," Energies, MDPI, vol. 12(17), pages 1-18, August.
    2. Byungyun Lee, 2019. "Heating, Cooling, and Lighting Energy Demand Simulation Analysis of Kinetic Shading Devices with Automatic Dimming Control for Asian Countries," Sustainability, MDPI, vol. 11(5), pages 1-20, February.
    3. Kyung-joo Cho & Dong-woo Cho, 2018. "Solar Heat Gain Coefficient Analysis of a Slim-Type Double Skin Window System: Using an Experimental and a Simulation Method," Energies, MDPI, vol. 11(1), pages 1-17, January.
    4. Soo Cho & Seok-Hyun Kim, 2017. "Analysis of the Performance of Vacuum Glazing in Office Buildings in Korea: Simulation and Experimental Studies," Sustainability, MDPI, vol. 9(6), pages 1-15, June.
    5. Aiman Mohammed & Muhammad Atiq Ur Rehman Tariq & Anne Wai Man Ng & Zeeshan Zaheer & Safwan Sadeq & Mahmood Mohammed & Hooman Mehdizadeh-Rad, 2022. "Reducing the Cooling Loads of Buildings Using Shading Devices: A Case Study in Darwin," Sustainability, MDPI, vol. 14(7), pages 1-20, March.
    6. Ángel Gómez-Moreno & Pedro José Casanova-Peláez & José Manuel Palomar-Carnicero & Fernando Cruz-Peragón, 2016. "Modeling and Experimental Validation of a Low-Cost Radiation Sensor Based on the Photovoltaic Effect for Building Applications," Energies, MDPI, vol. 9(11), pages 1-16, November.
    7. Ahmed M. Abdel-Ghany & Pietro Picuno & Ibrahim Al-Helal & Abdullah Alsadon & Abdullah Ibrahim & Mohamed Shady, 2015. "Radiometric Characterization, Solar and Thermal Radiation in a Greenhouse as Affected by Shading Configuration in an Arid Climate," Energies, MDPI, vol. 8(12), pages 1-10, December.
    8. Heangwoo Lee & Janghoo Seo, 2018. "Development of Window-Mounted Air Cap Roller Module," Energies, MDPI, vol. 11(7), pages 1-14, July.
    9. Vincenzo Dovì & Antonella Battaglini, 2015. "Energy Policy and Climate Change: A Multidisciplinary Approach to a Global Problem," Energies, MDPI, vol. 8(12), pages 1-8, November.
    10. Jin-Up Kim & Oussama A. Hadadi & Hyunjoo Kim & Jonghyeob Kim, 2018. "Development of A BIM-Based Maintenance Decision-Making Framework for the Optimization between Energy Efficiency and Investment Costs," Sustainability, MDPI, vol. 10(7), pages 1-15, July.
    11. Ye Liu & Wanjiang Wang & Zixiao Li & Junkang Song & Zhicheng Fang & Dongbing Pang & Yanhui Chen, 2023. "Daylighting Performance and Thermal Comfort Performance Analysis of West-Facing External Shading for School Office Buildings in Cold and Severe Cold Regions of China," Sustainability, MDPI, vol. 15(19), pages 1-27, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Byung-Lip Ahn & Ji-Woo Park & Seunghwan Yoo & Jonghun Kim & Seung-Bok Leigh & Cheol-Yong Jang, 2015. "Savings in Cooling Energy with a Thermal Management System for LED Lighting in Office Buildings," Energies, MDPI, vol. 8(7), pages 1-14, June.
    2. Belen Moreno Santamaria & Fernando del Ama Gonzalo & Benito Lauret Aguirregabiria & Juan A. Hernandez Ramos, 2020. "Experimental Validation of Water Flow Glazing: Transient Response in Real Test Rooms," Sustainability, MDPI, vol. 12(14), pages 1-24, July.
    3. De Boeck, L. & Verbeke, S. & Audenaert, A. & De Mesmaeker, L., 2015. "Improving the energy performance of residential buildings: A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 960-975.
    4. Seo, Dong-yeon & Koo, Choongwan & Hong, Taehoon, 2015. "A Lagrangian finite element model for estimating the heating and cooling demand of a residential building with a different envelope design," Applied Energy, Elsevier, vol. 142(C), pages 66-79.
    5. Aldossary, Naief A. & Rezgui, Yacine & Kwan, Alan, 2015. "Consensus-based low carbon domestic design framework for sustainable homes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 417-432.
    6. Kočí, Jan & Kočí, Václav & Maděra, Jiří & Černý, Robert, 2019. "Effect of applied weather data sets in simulation of building energy demands: Comparison of design years with recent weather data," Renewable and Sustainable Energy Reviews, Elsevier, vol. 100(C), pages 22-32.
    7. Andre Feliks Setiawan & Tzu-Ling Huang & Chun-Ta Tzeng & Chi-Ming Lai, 2015. "The Effects of Envelope Design Alternatives on the Energy Consumption of Residential Houses in Indonesia," Energies, MDPI, vol. 8(4), pages 1-15, April.
    8. Byung-Lip Ahn & Ji-Woo Park & Seunghwan Yoo & Jonghun Kim & Hakgeun Jeong & Seung-Bok Leigh & Cheol-Yong Jang, 2015. "Synergetic Effect between Lighting Efficiency Enhancement and Building Energy Reduction Using Alternative Thermal Operating System of Indoor LED Lighting," Energies, MDPI, vol. 8(8), pages 1-13, August.
    9. Saboor Shaik & Kirankumar Gorantla & Aritra Ghosh & Chelliah Arumugam & Venkata Ramana Maduru, 2021. "Energy Savings and Carbon Emission Mitigation Prospective of Building’s Glazing Variety, Window-to-Wall Ratio and Wall Thickness," Energies, MDPI, vol. 14(23), pages 1-19, December.
    10. Luis Ma. Bo-ot & Yao-Hong Wang & Che-Ming Chiang & Chi-Ming Lai, 2012. "Effects of a Green Space Layout on the Outdoor Thermal Environment at the Neighborhood Level," Energies, MDPI, vol. 5(10), pages 1-13, September.
    11. Ángel L. León & Samuel Domínguez & Miguel A. Campano & Cristina Ramírez-Balas, 2012. "Reducing the Energy Demand of Multi-Dwelling Units in a Mediterranean Climate Using Solar Protection Elements," Energies, MDPI, vol. 5(9), pages 1-27, September.
    12. Yen-Jong Chen & Rodney H Matsuoka & Tzu-Min Liang, 2018. "Urban form, building characteristics, and residential electricity consumption: A case study in Tainan City," Environment and Planning B, , vol. 45(5), pages 933-952, September.
    13. Koo, Choongwan & Park, Sungki & Hong, Taehoon & Park, Hyo Seon, 2014. "An estimation model for the heating and cooling demand of a residential building with a different envelope design using the finite element method," Applied Energy, Elsevier, vol. 115(C), pages 205-215.
    14. Cristina Carletti & Fabio Sciurpi & Leone Pierangioli, 2014. "The Energy Upgrading of Existing Buildings: Window and Shading Device Typologies for Energy Efficiency Refurbishment," Sustainability, MDPI, vol. 6(8), pages 1-24, August.
    15. Kyung Sun Lee & Ki Jun Han & Jae Wook Lee, 2017. "The Impact of Shading Type and Azimuth Orientation on the Daylighting in a Classroom–Focusing on Effectiveness of Façade Shading, Comparing the Results of DA and UDI," Energies, MDPI, vol. 10(5), pages 1-20, May.
    16. Mi-Su Shin & Kyu-Nam Rhee & Ji-Yong Yu & Gun-Joo Jung, 2017. "Determination of Equivalent Thermal Conductivity of Window Spacers in Consideration of Condensation Prevention and Energy Saving Performance," Energies, MDPI, vol. 10(5), pages 1-21, May.
    17. Fei Cao & Heng Zhang & Hao Zhou & Na Lu, 2018. "Transient Performance Analysis of the Solar Optical Guide Lighting System in Building Groups," Energies, MDPI, vol. 11(11), pages 1-13, October.
    18. Teng Shao & Wuxing Zheng & Hong Jin, 2020. "Analysis of the Indoor Thermal Environment and Passive Energy-Saving Optimization Design of Rural Dwellings in Zhalantun, Inner Mongolia, China," Sustainability, MDPI, vol. 12(3), pages 1-34, February.
    19. Bustamante, Waldo & Uribe, Daniel & Vera, Sergio & Molina, Germán, 2017. "An integrated thermal and lighting simulation tool to support the design process of complex fenestration systems for office buildings," Applied Energy, Elsevier, vol. 198(C), pages 36-48.
    20. Anna Laura Pisello & Franco Cotana & Andrea Nicolini & Lucia Brinchi, 2013. "Development of Clay Tile Coatings for Steep-Sloped Cool Roofs," Energies, MDPI, vol. 6(8), pages 1-17, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:8:y:2015:i:2:p:1487-1504:d:45991. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.