IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i6p2603-d1092718.html
   My bibliography  Save this article

An Aero-Structural Model for Ram-Air Kite Simulations

Author

Listed:
  • Paul Thedens

    (SkySails Power GmbH, Wendenstraße 375, 20537 Hamburg, Germany)

  • Roland Schmehl

    (Faculty of Aerospace Engineering, Delft University of Technology, 2629 HS Delft, The Netherlands)

Abstract

Similar to parafoils, ram-air kites are flexible membrane wings inflated by the apparent wind and supported by a bridle line system. A major challenge in estimating the performance of these wings using a computer model is the strong coupling between the airflow around the wing and the deformation of the membrane structure. In this paper, we introduce a staggered coupling scheme combining a structural finite element solver using a dynamic relaxation technique with a potential flow solver. The developed method proved numerically stable for determining the equilibrium shape of the wing under aerodynamic load and is thus suitable for performance measurement and load estimation. The method was validated with flight data provided by SkySails Power. Measured forces on the tether and steering belt of the robotic kite control pod showed good resemblance with the simulation results. As expected for a potential flow solver, the kite’s glide ratio was overestimated by 10–15%, and the measured tether elevation angle in a neutral flight scenario matched the simulations within 2 degrees. Based on the obtained results, it can be concluded that the proposed aero-structural model can be used for initial designs of ram-air kites with application to airborne wind energy.

Suggested Citation

  • Paul Thedens & Roland Schmehl, 2023. "An Aero-Structural Model for Ram-Air Kite Simulations," Energies, MDPI, vol. 16(6), pages 1-18, March.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:6:p:2603-:d:1092718
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/6/2603/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/6/2603/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Argatov, I. & Rautakorpi, P. & Silvennoinen, R., 2009. "Estimation of the mechanical energy output of the kite wind generator," Renewable Energy, Elsevier, vol. 34(6), pages 1525-1532.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lunney, E. & Ban, M. & Duic, N. & Foley, A., 2017. "A state-of-the-art review and feasibility analysis of high altitude wind power in Northern Ireland," Renewable and Sustainable Energy Reviews, Elsevier, vol. 68(P2), pages 899-911.
    2. Saleem, Arslan & Kim, Man-Hoe, 2020. "Aerodynamic performance optimization of an airfoil-based airborne wind turbine using genetic algorithm," Energy, Elsevier, vol. 203(C).
    3. Ali, Qazi Shahzad & Kim, Man-Hoe, 2021. "Design and performance analysis of an airborne wind turbine for high-altitude energy harvesting," Energy, Elsevier, vol. 230(C).
    4. Juliane Müller & Christine Shoemaker, 2014. "Influence of ensemble surrogate models and sampling strategy on the solution quality of algorithms for computationally expensive black-box global optimization problems," Journal of Global Optimization, Springer, vol. 60(2), pages 123-144, October.
    5. Sridhar, Surya & Zuber, Mohammad & B., Satish Shenoy & Kumar, Amit & Ng, Eddie Y.K. & Radhakrishnan, Jayakrishnan, 2022. "Aerodynamic comparison of slotted and non-slotted diffuser casings for Diffuser Augmented Wind Turbines (DAWT)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    6. Leloup, R. & Roncin, K. & Behrel, M. & Bles, G. & Leroux, J.-B. & Jochum, C. & Parlier, Y., 2016. "A continuous and analytical modeling for kites as auxiliary propulsion devoted to merchant ships, including fuel saving estimation," Renewable Energy, Elsevier, vol. 86(C), pages 483-496.
    7. Argatov, I. & Silvennoinen, R., 2010. "Energy conversion efficiency of the pumping kite wind generator," Renewable Energy, Elsevier, vol. 35(5), pages 1052-1060.
    8. Dadd, George M. & Hudson, Dominic A. & Shenoi, R.A., 2011. "Determination of kite forces using three-dimensional flight trajectories for ship propulsion," Renewable Energy, Elsevier, vol. 36(10), pages 2667-2678.
    9. De Lellis, M. & Mendonça, A.K. & Saraiva, R. & Trofino, A. & Lezana, Á., 2016. "Electric power generation in wind farms with pumping kites: An economical analysis," Renewable Energy, Elsevier, vol. 86(C), pages 163-172.
    10. Fagiano, L. & Schnez, S., 2017. "On the take-off of airborne wind energy systems based on rigid wings," Renewable Energy, Elsevier, vol. 107(C), pages 473-488.
    11. Trevisi, Filippo & Gaunaa, Mac & McWilliam, Michael, 2020. "Unified engineering models for the performance and cost of Ground-Gen and Fly-Gen crosswind Airborne Wind Energy Systems," Renewable Energy, Elsevier, vol. 162(C), pages 893-907.
    12. Yin, Xiuxing & Zhao, Xiaowei & Zhang, Wencan, 2018. "A novel hydro-kite like energy converter for harnessing both ocean wave and current energy," Energy, Elsevier, vol. 158(C), pages 1204-1212.
    13. Shahzad Ali, Qazi & Kim, Man-Hoe, 2022. "Quantifying impacts of shell augmentation on power output of airborne wind energy system at elevated heights," Energy, Elsevier, vol. 239(PA).
    14. Licitra, G. & Koenemann, J. & Bürger, A. & Williams, P. & Ruiterkamp, R. & Diehl, M., 2019. "Performance assessment of a rigid wing Airborne Wind Energy pumping system," Energy, Elsevier, vol. 173(C), pages 569-585.
    15. Ali, Qazi Shahzad & Kim, Man-Hoe, 2022. "Power conversion performance of airborne wind turbine under unsteady loads," Renewable and Sustainable Energy Reviews, Elsevier, vol. 153(C).
    16. Cherubini, Antonello & Papini, Andrea & Vertechy, Rocco & Fontana, Marco, 2015. "Airborne Wind Energy Systems: A review of the technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1461-1476.
    17. Ban, Marko & Perković, Luka & Duić, Neven & Penedo, Ricardo, 2013. "Estimating the spatial distribution of high altitude wind energy potential in Southeast Europe," Energy, Elsevier, vol. 57(C), pages 24-29.
    18. André F. C. Pereira & João M. M. Sousa, 2022. "A Review on Crosswind Airborne Wind Energy Systems: Key Factors for a Design Choice," Energies, MDPI, vol. 16(1), pages 1-40, December.
    19. Argatov, Ivan & Shafranov, Valentin, 2016. "Economic assessment of small-scale kite wind generators," Renewable Energy, Elsevier, vol. 89(C), pages 125-134.
    20. Goldstein, Leo, 2013. "Theoretical analysis of an airborne wind energy conversion system with a ground generator and fast motion transfer," Energy, Elsevier, vol. 55(C), pages 987-995.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:6:p:2603-:d:1092718. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.