IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i13p3753-d580167.html
   My bibliography  Save this article

Optimization of Air Cooling System Using Adjoint Solver Technique

Author

Listed:
  • Grzegorz Czerwiński

    (Department of Power Systems and Environmental Protection Facilities, Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, Mickiewicz 30 Av., 30-059 Krakow, Poland
    These authors contributed equally to this work.)

  • Jerzy Wołoszyn

    (Department of Power Systems and Environmental Protection Facilities, Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, Mickiewicz 30 Av., 30-059 Krakow, Poland
    These authors contributed equally to this work.)

Abstract

Air cooling systems are currently the most popular and least expensive solutions to maintain a safe temperature in electronic devices. Heat sinks have been widely used in this area, allowing for an increase in the effective heat transfer surface area. The main objective of this study was to optimise the shape of the heat sink geometric model using the Adjoint Solver technique. The optimised shape in the context of minimal temperature value behind the heat sink is proposed. The effect of radiation and trapezoidal fin shape on the maximum temperature in the cooling system is also investigated. Simulation studies were performed in Ansys Fluent software using the Reynolds—averaged Navier–Stokes technique. As a result of the simulation, it turned out that not taking into account the radiation leads to an overestimation of temperatures in the system—even by 14 ∘ C. It was found that as the angle and height of the fins increases, the temperature value behind the heat sink decreases and the heat source temperature increases. The best design in the context of minimal temperature value behind the heat sink from all analysed cases is obtained for heat sink with deformed fins according to iteration 14. The temperature reduction behind the heat sink by as much as 25 ∘ C, with minor changes in heat source temperature, has been achieved.

Suggested Citation

  • Grzegorz Czerwiński & Jerzy Wołoszyn, 2021. "Optimization of Air Cooling System Using Adjoint Solver Technique," Energies, MDPI, vol. 14(13), pages 1-24, June.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:13:p:3753-:d:580167
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/13/3753/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/13/3753/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Leung, C.W. & Probert, S.D. & Shilston, M.J., 1985. "Heat exchanger: Optimal separation for vertical rectangular fins protruding from a vertical rectangular base," Applied Energy, Elsevier, vol. 19(2), pages 77-85.
    2. Madjid Soltani & Alireza Dehghani-Sanij & Ahmad Sayadnia & Farshad M. Kashkooli & Kobra Gharali & SeyedBijan Mahbaz & Maurice B. Dusseault, 2018. "Investigation of Airflow Patterns in a New Design of Wind Tower with a Wetted Surface," Energies, MDPI, vol. 11(5), pages 1-23, April.
    3. Leung, C.W. & Probert, S.D., 1989. "Heat-exchanger performance: Effect of orientation," Applied Energy, Elsevier, vol. 33(4), pages 235-252.
    4. Leung, C.W. & Probert, S.D. & Shilston, M.J., 1985. "Heat exchanger design: Optimal uniform separation between rectangular fins protruding from a vertical rectangular base," Applied Energy, Elsevier, vol. 19(4), pages 287-299.
    5. Leung, C.W. & Probert, S.D. & Shilston, M.J., 1986. "Heat transfer performances of vertical rectangular fins protruding from rectangular bases: Effect of fin length," Applied Energy, Elsevier, vol. 22(4), pages 313-318.
    6. Farshad Moradi Kashkooli & Mostafa Sefidgar & Madjid Soltani & Shahab Anbari & Seyed-Amir Shahandashti & Bahram Zargar, 2021. "Numerical Assessment of an Air Cleaner Device under Different Working Conditions in an Indoor Environment," Sustainability, MDPI, vol. 13(1), pages 1-22, January.
    7. Harahap, Filino & Setio, Daru, 2001. "Correlations for heat dissipation and natural convection heat-transfer from horizontally-based, vertically-finned arrays," Applied Energy, Elsevier, vol. 69(1), pages 29-38, May.
    8. Leung, C. W. & Probert, S. D., 1989. "Thermal effectiveness of short-protrusion rectangular, heat-exchanger fins," Applied Energy, Elsevier, vol. 34(1), pages 1-8.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Harahap, Filino & Setio, Daru, 2001. "Correlations for heat dissipation and natural convection heat-transfer from horizontally-based, vertically-finned arrays," Applied Energy, Elsevier, vol. 69(1), pages 29-38, May.
    2. Leung, C. W. & Probert, S. D., 1997. "Heat-exchanger performance: Influence of gap width between consecutive vertical rectangular fin-arrays," Applied Energy, Elsevier, vol. 56(1), pages 1-8, January.
    3. Mohammad Souri & Farshad Moradi Kashkooli & Madjid Soltani & Kaamran Raahemifar, 2021. "Effect of Upstream Side Flow of Wind Turbine on Aerodynamic Noise: Simulation Using Open-Loop Vibration in the Rod in Rod-Airfoil Configuration," Energies, MDPI, vol. 14(4), pages 1-24, February.
    4. Jin-Cherng Shyu & Tsuni Chang & Shun-Ching Lee, 2017. "A Numerical Study on Natural Convection Heat Transfer of Handheld Projectors with a Fin Array," Energies, MDPI, vol. 10(3), pages 1-17, February.
    5. Jang, Daeseok & Yook, Se-Jin & Lee, Kwan-Soo, 2014. "Optimum design of a radial heat sink with a fin-height profile for high-power LED lighting applications," Applied Energy, Elsevier, vol. 116(C), pages 260-268.
    6. Wang, Zhe & Li, Yanzhong, 2016. "A combined method for surface selection and layer pattern optimization of a multistream plate-fin heat exchanger," Applied Energy, Elsevier, vol. 165(C), pages 815-827.
    7. Alsailani, M. & Montazeri, H. & Rezaeiha, A., 2021. "Towards optimal aerodynamic design of wind catchers: Impact of geometrical characteristics," Renewable Energy, Elsevier, vol. 168(C), pages 1344-1363.
    8. Ding, Yudong & Zhang, Wenhe & Deng, Bin & Gu, Yuheng & Liao, Qiang & Long, Zhenze & Zhu, Xun, 2022. "Experimental and numerical investigation on natural convection heat transfer characteristics of vertical 3-D externally finned tubes," Energy, Elsevier, vol. 239(PB).
    9. Zeyu Peng & Zeyu Li & Junquan Zeng & Jianting Yu, 2022. "Thermodynamic Study of Solar-Assisted Hybrid Cooling Systems with Consideration of Duration in Heat-Driven Processes," Energies, MDPI, vol. 15(10), pages 1-22, May.
    10. Dehghani-Sanij, A.R. & Tharumalingam, E. & Dusseault, M.B. & Fraser, R., 2019. "Study of energy storage systems and environmental challenges of batteries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 104(C), pages 192-208.
    11. Shaeri, M.R. & Yaghoubi, M. & Jafarpur, K., 2009. "Heat transfer analysis of lateral perforated fin heat sinks," Applied Energy, Elsevier, vol. 86(10), pages 2019-2029, October.
    12. Carson Kinney & Alireza Dehghani-Sanij & SeyedBijan Mahbaz & Maurice B. Dusseault & Jatin S. Nathwani & Roydon A. Fraser, 2019. "Geothermal Energy for Sustainable Food Production in Canada’s Remote Northern Communities," Energies, MDPI, vol. 12(21), pages 1-25, October.
    13. Soltani, M. & Moradi Kashkooli, Farshad & Alian Fini, Mehdi & Gharapetian, Derrick & Nathwani, Jatin & Dusseault, Maurice B., 2022. "A review of nanotechnology fluid applications in geothermal energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    14. Farshad Moradi Kashkooli & Mostafa Sefidgar & Madjid Soltani & Shahab Anbari & Seyed-Amir Shahandashti & Bahram Zargar, 2021. "Numerical Assessment of an Air Cleaner Device under Different Working Conditions in an Indoor Environment," Sustainability, MDPI, vol. 13(1), pages 1-22, January.
    15. Ghosh, Aritra & Norton, Brian & Duffy, Aidan, 2016. "Behaviour of a SPD switchable glazing in an outdoor test cell with heat removal under varying weather conditions," Applied Energy, Elsevier, vol. 180(C), pages 695-706.
    16. Margherita Ferrucci & Fabio Peron, 2018. "Ancient Use of Natural Geothermal Resources: Analysis of Natural Cooling of 16th Century Villas in Costozza (Italy) as a Reference for Modern Buildings," Sustainability, MDPI, vol. 10(12), pages 1-20, November.
    17. Hasan Alimoradi & Madjid Soltani & Pooriya Shahali & Farshad Moradi Kashkooli & Razieh Larizadeh & Kaamran Raahemifar & Mohammad Adibi & Behzad Ghasemi, 2020. "Experimental Investigation on Improvement of Wet Cooling Tower Efficiency with Diverse Packing Compaction Using ANN-PSO Algorithm," Energies, MDPI, vol. 14(1), pages 1-19, December.
    18. Liu, Xin & Shi, Xilin & Li, Yinping & Ye, Liangliang & Wei, Xinxing & Zhu, Shijie & Bai, Weizheng & Ma, Hongling & Yang, Chunhe, 2023. "Synthetic salt rock prepared by molten salt crystallization and its physical and mechanical properties," Energy, Elsevier, vol. 269(C).
    19. Lazarov, Boyan S. & Sigmund, Ole & Meyer, Knud E. & Alexandersen, Joe, 2018. "Experimental validation of additively manufactured optimized shapes for passive cooling," Applied Energy, Elsevier, vol. 226(C), pages 330-339.
    20. Farzanehkhameneh, Pooya & Soltani, M. & Moradi Kashkooli, Farshad & Ziabasharhagh, Masoud, 2020. "Optimization and energy-economic assessment of a geothermal heat pump system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:13:p:3753-:d:580167. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.